DIME - Test Summary

Summary for Test 2019-04-22-6-4

Test performed: AASHTO T84-14

Project Identifiers	Project ID: 213888 DEA: 024H2704 EFIS: 0218000101
DIST-CO-RTE-PM	02-SHA-44-34.0/43.2
Award Date	03/21/2019
Closeout Date	12/04/2019
Work Description	PLACE HMA (TYPE A) OVERLAY.
Location Description	SHASTA COUNTY AT AND NEAR VIOLA FROM 0.2 MILE EAST OF MILL CREEK ROAD TO 0.8 MILE EAST OF DEER FLAT ROAD
QA Service Level	1 (Verified on 04/03/2019)

Sample Taken Date	04/22/2019	Sample Unique Key	6
Date that the sample was received by the laboratory/organization performing the testing	04/22/2019	Sample type	Verification
A brief description of the sample	Combined Untreated Virgin 1/2-inch Type A Aggregate	The quantity of what the sample constitutes	JMF Verification
From where was the sample collected	Manufacturer	First name of sampler or witnessed by	Anthony
Last name of sampler or witnessed by	Ortiz	Title of sampler
Telephone number of sampler		Laboratory sample identification	D77841F
Linked DIME Sample ID		The fabricator/manufacturer/facility name	Shasta Ranch Aggregates
Transportation Laboratory (TL) Number	736648	Inspector Lot Number from the Transportation Laboratory (TL) Form
Structure unique identifier		Structure name
Bid Item	Not set

Material Type	Aggregate	Source Identification (SMARA, name of Pit or Job Site)	91-45-0057::SHASTA RANCH AGGREGATES
The fabricator's/manufacturer's product name for the sample	Unknown	The fabricator/manufacturer designation for the sample	L190860
The plant number	Unknown	A detailed description of where the material sample was collected	Lab-Batched from Sized Untreated Aggregate Stockpiles
Where the material sample would have been placed if not sampled	Unknown	Primary Aggregate Nominal Size	1/2 inch
The concrete mix design number	JMF 19-11-S1	Lot number	0
Sublot number	0	Aggregate Mix Number	Not set

DIME Sample ID: 2019-04-22-6

DIME Test ID: 2019-04-22-6-4

Testing Lab: CT D02 - Redding Northern Regional Laboratory

Test Method: AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)

Test Release Date: 2019-06-27

Input Type: Measured

Tester's full name: Dennis Hickey

Date of test: 06/27/2019

Mass of saturated surface dry sample (before pycnometer) (S)	500.8 grams
Mass of the pycnometer with water and aggregate (C)	962.0 grams
Mass of the pycnometer with water (B)	648.1 grams
Mass of the oven dried sample (before pycnometer) (A)	493.3 grams
Mass of the saturated surface dry aggregate (for absorption) (S)	500.8 grams
Mass of the oven dry aggregate (for absorption) (A)	493.3 grams
Test Sample Preparation	Total Saturation
Bulk specific gravity	2.639
Bulk specific gravity (SSD Basis)	2.680
Apparent specific gravity	2.750
Absorption	1.5 %

General comments (publicly viewable) (Max 1000 characters):

Test was verified on 6/27/2019 ✔