Summary for Test 2019-06-06-11-6
Test performed: ASTM D624-00-re12Project Information
| Project Identifiers | Project ID: 213750 DEA: 120K0224 EFIS: 1214000097 |
|---|---|
| DIST-CO-RTE-PM | 12-ORA-5-14.5/17.1 |
| Award Date | 03/05/2019 |
| Closeout Date | 03/13/2025 |
| Work Description | South County Improvement Project (Phase 2 - Oso/Alicia) CONST BRIDGES, RW, SW, HMA PVMT, JPCP, DRAINAGE, AND ELECT SYSTEMS. |
| Location Description | ORANGE COUNTY IN MISSION VIEJO AND LAGUNA HILLS FROM 0.7 MILE SOUTH OF OSO PARKWAY OVERCROSSING TO 0.3 MILE SOUTH OF ALICIA PARKWAY OVERCROSSING |
| QA Service Level | 1 (Verified on 04/15/2019) |
Sample Information
| Sample Taken Date | 06/06/2019 | Sample Unique Key | 11 |
|---|---|---|---|
| Date that the sample was received by the laboratory/organization performing the testing | 06/12/2019 | Sample type | Quality Assurance |
| A brief description of the sample | Bearing Pad | The quantity of what the sample constitutes | 1 |
| From where was the sample collected | Manufacturer | First name of sampler or witnessed by | Kayla |
| Last name of sampler or witnessed by | Wallace | Title of sampler | |
| Telephone number of sampler | Laboratory sample identification | ||
| Linked DIME Sample ID | The fabricator/manufacturer/facility name | Dynamic Rubber | |
| Transportation Laboratory (TL) Number | Inspector Lot Number from the Transportation Laboratory (TL) Form | ||
| Structure unique identifier | Structure name | ||
| Bid Item | Not set |
Material Information
| Material Type | SMTL TM1 - Elastomeric Bearing Pad | Mfg. Lot Number(s) | 15460 |
|---|---|---|---|
| Material/Compound/Elastomer ID | na | Samples Representing | 144 |
| Description (size) | 5.18"x18"x18" 4.60"x18"x18" 2.30"x12x12"" | Comments | CR55 007 19 CR55 008 19 CR55 012 19 |
| Description (Number of Shims) | 9 4 | Type of Bearing Pad | Steel |
| Description (Thickness of Shims) | 14 gage | Manufacturer(s) | Dynamic Rubber |
| Batch Number | na |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2019-06-06-11
DIME Test ID: 2019-06-06-11-6
Testing Lab: CT HQ - Sacramento Structural Materials Testing Laboratory
Test Method: ASTM D624-00-re12: Standard Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers
Test Release Date: 2019-06-27
Test Results
Number of specimens tested: 3
Input Type: Measured
Tester's full name: Brian
Date of test: 06/27/2019
Humidity: 50 %
Temperature: 72 F
Sample 1 Median Thickness: 0.06 in
Sample 1 Tear Strength: 216.7 lbf / in
Sample 2 Median Thickness: 0.061 in
Sample 2 Tear Strength: 213.1 lbf / in
Sample 3 Median Thickness: 0.059 in
Sample 3 Tear Strength: 203.4 lbf / in
UTM: no data
Median of the Tear Strength Values: 213.1 lb/in
General comments (publicly viewable) (Max 1000 characters):
Test Graph
Source: Partner Data Point FileTest graph for Sample 1
Source: Partner Data Point File
Test graph for Sample 2
Source: Partner Data Point File
Test graph for Sample 3
Test was verified on 6/27/2019 ✔