DIME - Test Summary

Summary for Test 2019-05-15-9-4

Test performed: AASHTO T84-14

Project Identifiers	Project ID: 213740 DEA: 07312604
DIST-CO-RTE-PM	07-LA-5-R77.5/R81.8
Award Date	01/04/2019
Closeout Date	06/04/2020
Work Description	EXCAVATE DITCHES, PLACE PERM MTL, AND CONSTRUCT RET WALLS.
Location Description	LOS ANGELES COUNTY AT VARIOUS LOCATIONS FROM 0.4 MILE SOUTH OF SMOKEY BEAR ROAD UNDERCROSSING TO 0.3 MILE SOUTH OF ROUTE 5/138 SEPARATION
QA Service Level	1 (Verified on 06/04/2020)

Sample Taken Date	05/15/2019	Sample Unique Key	9
Date that the sample was received by the laboratory/organization performing the testing	05/17/2019	Sample type	Verification
A brief description of the sample	3/4 WMA-A-SP R15	The quantity of what the sample constitutes	JMF 18 Bags
From where was the sample collected	Manufacturer	First name of sampler or witnessed by	Vulcan Sun Valley
Last name of sampler or witnessed by	QC	Title of sampler
Telephone number of sampler		Laboratory sample identification	0283A-19
Linked DIME Sample ID		The fabricator/manufacturer/facility name	Sheldon, Boulevard, Big Rock Creek
Transportation Laboratory (TL) Number		Inspector Lot Number from the Transportation Laboratory (TL) Form
Structure unique identifier		Structure name
Bid Item	Not set

Material Type	Aggregate	Source Identification (SMARA, name of Pit or Job Site)	91-19-0017, 91-19-0019, 91-19-0021
The fabricator's/manufacturer's product name for the sample	3/4 WMA A SP R15	The fabricator/manufacturer designation for the sample	220826 SVA SJR
The plant number	Unknown	A detailed description of where the material sample was collected	Manufacturer
Where the material sample would have been placed if not sampled	Unknown	Primary Aggregate Nominal Size	3/4 inch
The concrete mix design number	Unknown	Lot number	Unknown
Sublot number	Unknown	Aggregate Mix Number	Not set

DIME Sample ID: 2019-05-15-9

DIME Test ID: 2019-05-15-9-4

Testing Lab: CT D08 - Fontana Southern Regional Laboratory

Test Method: AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)

Test Release Date: 2019-06-06

Input Type: Measured

Tester's full name: Larry Diaz

Date of test: 05/20/2019

Mass of saturated surface dry sample (before pycnometer) (S)	500.0 grams
Mass of the pycnometer with water and aggregate (C)	968.7 grams
Mass of the pycnometer with water (B)	655.0 grams
Mass of the oven dried sample (before pycnometer) (A)	495.7 grams
Mass of the saturated surface dry aggregate (for absorption) (S)	500.0 grams
Mass of the oven dry aggregate (for absorption) (A)	495.7 grams
Test Sample Preparation	Total Saturation
Bulk specific gravity	2.661
Bulk specific gravity (SSD Basis)	2.684
Apparent specific gravity	2.724
Absorption	0.9 %

General comments (publicly viewable) (Max 1000 characters):

Test was verified on 5/30/2019 ✔