Summary for Test 2019-05-13-4-1
Test performed: AASHTO T27-14Project Information
| Project Identifiers | Project ID: 212911 DEA: 081F9404 EFIS: 0815000067 |
|---|---|
| DIST-CO-RTE-PM | 08-RIV-79-R4.7/R10.6 |
| Award Date | 05/22/2018 |
| Closeout Date | 06/23/2021 |
| Work Description | COLD PLANE, OVERLAY WITH RUBBERIZED HOT MIX ASPHALT (TYPE G) |
| Location Description | RIVERSIDE COUNTY FROM 0.1 MILE SOUTH OF MURRIETA HOT SPRINGS ROAD TO 0.1MILE NORTH OF ABELIA ROAD |
| QA Service Level | 1 (Verified on 12/28/2018) |
Sample Information
| Sample Taken Date | 05/13/2019 | Sample Unique Key | 4 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 05/14/2019 |
| Sample type | Department Acceptance | A brief description of the sample | 3/4 inch combined agg |
| The quantity of what the sample constitutes | 1 bag | From where was the sample collected | Manufacturer |
| First name of sampler or witnessed by | Idris | Last name of sampler or witnessed by | Najjar |
| Title of sampler | Telephone number of sampler | ||
| Laboratory sample identification | Linked DIME Sample ID | ||
| The fabricator/manufacturer/facility name | R J Noble | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-33-0014::CHANDLER - COLDWATER |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | 3/4 RHMA-G | The fabricator/manufacturer designation for the sample | 49R003ARSP-C |
| The plant number | Unknown | A detailed description of where the material sample was collected | HMA Plant Cold Feed |
| Where the material sample would have been placed if not sampled | Unknown | Primary Aggregate Nominal Size | 3/4 inch |
| The concrete mix design number | Unknown | Lot number | Unknown |
| Sublot number | Unknown | Aggregate Mix Number | Not set |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2019-05-13-4
DIME Test ID: 2019-05-13-4-1
Testing Lab: CT D08 - Fontana Field Testing Laboratory
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Test Release Date: 2019-05-21
Test Results
What type of gradation is being tested?: Combined Gradation
Individual or cumulative mass retained on each sieve?: Cumulative Mass Retained
Does this test use 1/4 sieve? (question for HMA Gradation Type): No
Has the fine aggregate sample been reduced?: No
Input Type: Calculated
Tester's full name: M. Sarder
Date of test: 05/14/2019
Cumulative percent passing the 2 in. sieve: 100 %
Cumulative percent passing the 1 1/2 in. sieve: 100 %
Cumulative percent passing the 1 in. sieve: 100 %
Cumulative percent passing the 3/4 in. sieve: 97 %
Cumulative percent passing the 1/2 in. sieve: 80 %
Cumulative percent passing the 3/8 in. sieve: 60 %
Cumulative percent passing the #4 sieve: 31 %
Cumulative percent passing the #8 sieve: 17 %
Cumulative percent passing the #16 sieve: 11 %
Cumulative percent passing the #30 sieve: 8 %
Cumulative percent passing the #50 sieve: 5 %
Cumulative percent passing the #100 sieve: 4 %
Cumulative percent passing the #200 sieve: 3.1 %
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 5/21/2019 ✔