DIME - Test Summary

Summary for Test 2019-05-08-17-4

Test performed: AASHTO T84-14

Project Identifiers	Project ID: 213306 DEA: 07303404 EFIS: 0714000006
DIST-CO-RTE-PM	07-VEN-33-0.0/6.3
Award Date	06/18/2018
Closeout Date	05/10/2021
Work Description	COLD PLANE AC PVMT, PLACE RUBBERIZED AC (TYPE G), AND REPLACE PCC PVMT
Location Description	VENTURA COUNTY IN AND NEAR VENTURA FROM ROUTE 33/101 SEPARATION TO 0.1 MILE SOUTH OF PARK VIEW DRIVE
QA Service Level	1 (Verified on 12/09/2020)

Sample Taken Date	05/08/2019	Sample Unique Key	17
Date that the sample was received by the laboratory/organization performing the testing	05/10/2019	Sample type	Verification
A brief description of the sample	1/2 RHMA-G-SP	The quantity of what the sample constitutes	PSE 4 bags
From where was the sample collected	Manufacturer	First name of sampler or witnessed by	Vulcan Saticoy
Last name of sampler or witnessed by	QC	Title of sampler
Telephone number of sampler		Laboratory sample identification	0274G-19
Linked DIME Sample ID		The fabricator/manufacturer/facility name	Palmdale, Big Rock Creek, Blvd, Sheldon
Transportation Laboratory (TL) Number		Inspector Lot Number from the Transportation Laboratory (TL) Form
Structure unique identifier		Structure name
Bid Item	Not set

Material Type	Aggregate	Source Identification (SMARA, name of Pit or Job Site)	91-19-0017, 91-19-0019, 91-19-0021
The fabricator's/manufacturer's product name for the sample	1/2 RHMA-G-SP	The fabricator/manufacturer designation for the sample	326120 SAT LTR
The plant number	Unknown	A detailed description of where the material sample was collected	Belt Cut at Plant
Where the material sample would have been placed if not sampled	Unknown	Primary Aggregate Nominal Size	1/2 inch
The concrete mix design number	Unknown	Lot number	Unknown
Sublot number	Unknown	Aggregate Mix Number	Not set

DIME Sample ID: 2019-05-08-17

DIME Test ID: 2019-05-08-17-4

Testing Lab: CT D08 - Fontana Southern Regional Laboratory

Test Method: AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)

Test Release Date: 2019-06-06

Input Type: Measured

Tester's full name: Larry Diaz

Date of test: 05/14/2019

Mass of saturated surface dry sample (before pycnometer) (S)	500.0 grams
Mass of the pycnometer with water and aggregate (C)	963.7 grams
Mass of the pycnometer with water (B)	651.2 grams
Mass of the oven dried sample (before pycnometer) (A)	494.2 grams
Mass of the saturated surface dry aggregate (for absorption) (S)	500.0 grams
Mass of the oven dry aggregate (for absorption) (A)	494.2 grams
Test Sample Preparation	Total Saturation
Bulk specific gravity	2.636
Bulk specific gravity (SSD Basis)	2.667
Apparent specific gravity	2.720
Absorption	1.2 %

General comments (publicly viewable) (Max 1000 characters):

Test was verified on 5/30/2019 ✔