DIME - Test Summary

Summary for Test 2019-04-25-6-4

Test performed: AASHTO T84-14

Project Identifiers	Project ID: 213606 DEA: 081E6104 EFIS: 0814000055
DIST-CO-RTE-PM	08-SBD-62-41.0/41.5and60.6/61.1
Award Date	10/31/2018
Closeout Date	11/12/2019
Work Description	WIDENING OF SHOULDER AND INSTALLING RUMBLE STRIPS
Location Description	SAN BERNARDINO COUNTY NEAR TWENTYNINE PALMS FROM 0.7 MILE TO 1.2 MILES EAST OF GODWIN ROAD AND FROM 5.6 MILES TO 6.1 MILES EAST OF IRONAGE ROAD
QA Service Level	1 (Verified on 11/30/2018)

Sample Taken Date	04/25/2019	Sample Unique Key	6
Date that the sample was received by the laboratory/organization performing the testing	05/06/2019	Sample type	Verification
A brief description of the sample	3/4 RHMA-G-SP	The quantity of what the sample constitutes	PSE 4 bags
From where was the sample collected	Manufacturer	First name of sampler or witnessed by	All American Asphalt Perris
Last name of sampler or witnessed by	QC	Title of sampler
Telephone number of sampler		Laboratory sample identification	0263G-19
Linked DIME Sample ID		The fabricator/manufacturer/facility name	All American Asphalt Corona
Transportation Laboratory (TL) Number		Inspector Lot Number from the Transportation Laboratory (TL) Form
Structure unique identifier		Structure name
Bid Item	Not set

Material Type	Aggregate	Source Identification (SMARA, name of Pit or Job Site)	91-33-0005::ALL AMERICAN ASPHALT
The fabricator's/manufacturer's product name for the sample	3/4 RHMA-G-SP	The fabricator/manufacturer designation for the sample	106835
The plant number	Unknown	A detailed description of where the material sample was collected	Belt Cut at Plant
Where the material sample would have been placed if not sampled	Unknown	Primary Aggregate Nominal Size	3/4 inch
The concrete mix design number	Unknown	Lot number	Unknown
Sublot number	Unknown	Aggregate Mix Number	Not set

DIME Sample ID: 2019-04-25-6

DIME Test ID: 2019-04-25-6-4

Testing Lab: CT D08 - Fontana Southern Regional Laboratory

Test Method: AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)

Test Release Date: 2019-06-06

Input Type: Measured

Tester's full name: Sebastian Ferrer

Date of test: 05/09/2019

Mass of saturated surface dry sample (before pycnometer) (S)	500.0 grams
Mass of the pycnometer with water and aggregate (C)	964.5 grams
Mass of the pycnometer with water (B)	653.8 grams
Mass of the oven dried sample (before pycnometer) (A)	489.6 grams
Mass of the saturated surface dry aggregate (for absorption) (S)	500.0 grams
Mass of the oven dry aggregate (for absorption) (A)	489.6 grams
Test Sample Preparation	Total Saturation
Bulk specific gravity	2.586
Bulk specific gravity (SSD Basis)	2.641
Apparent specific gravity	2.737
Absorption	2.1 %

General comments (publicly viewable) (Max 1000 characters):

Test was verified on 5/30/2019 ✔