DIME - Test Summary

Summary for Test 2019-05-03-11-1

Test performed: AASHTO T27-14

Project Identifiers	Project ID: 213606 DEA: 081E6104 EFIS: 0814000055
DIST-CO-RTE-PM	08-SBD-62-41.0/41.5and60.6/61.1
Award Date	10/31/2018
Closeout Date	11/12/2019
Work Description	WIDENING OF SHOULDER AND INSTALLING RUMBLE STRIPS
Location Description	SAN BERNARDINO COUNTY NEAR TWENTYNINE PALMS FROM 0.7 MILE TO 1.2 MILES EAST OF GODWIN ROAD AND FROM 5.6 MILES TO 6.1 MILES EAST OF IRONAGE ROAD
QA Service Level	1 (Verified on 11/30/2018)

Sample Taken Date	05/03/2019	Sample Unique Key	11
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	05/03/2019
Sample type	Department Acceptance	A brief description of the sample	Combined 3/4-inch Type A Aggregate
The quantity of what the sample constitutes	1 bag	From where was the sample collected	Manufacturer
First name of sampler or witnessed by	Ahamd	Last name of sampler or witnessed by	Alzubi
Title of sampler		Telephone number of sampler
Laboratory sample identification		Linked DIME Sample ID
The fabricator/manufacturer/facility name	All American Asphalt Perris	Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form		Structure unique identifier
Structure name

Material Type	Aggregate	Source Identification (SMARA, name of Pit or Job Site)	91-33-0005::ALL AMERICAN ASPHALT
The fabricator's/manufacturer's product name for the sample	Unknown	The fabricator/manufacturer designation for the sample	Unknown
The plant number	Unknown	A detailed description of where the material sample was collected	HMA Plant Cold Feed
Where the material sample would have been placed if not sampled	Unknown	Primary Aggregate Nominal Size	3/4 inch
The concrete mix design number	Unknown	Lot number	Unknown
Sublot number	Unknown	Aggregate Mix Number	Not set

DIME Sample ID: 2019-05-03-11

DIME Test ID: 2019-05-03-11-1

Testing Lab: CT D08 - Fontana Field Testing Laboratory

Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)

Test Release Date: 2019-05-17

What type of gradation is being tested?: Combined Gradation

Individual or cumulative mass retained on each sieve?: Cumulative Mass Retained

Does this test use 1/4 sieve? (question for HMA Gradation Type): No

Has the fine aggregate sample been reduced?: No

Input Type: Calculated

Tester's full name: MD Sarder

Date of test: 05/06/2019

Cumulative percent passing the 2 in. sieve: 100 %

Cumulative percent passing the 1 1/2 in. sieve: 100 %

Cumulative percent passing the 1 in. sieve: 100 %

Cumulative percent passing the 3/4 in. sieve: 100 %

Cumulative percent passing the 1/2 in. sieve: 83 %

Cumulative percent passing the 3/8 in. sieve: 65 %

Cumulative percent passing the #4 sieve: 42 %

Cumulative percent passing the #8 sieve: 26 %

Cumulative percent passing the #16 sieve: 17 %

Cumulative percent passing the #30 sieve: 11 %

Cumulative percent passing the #50 sieve: 7 %

Cumulative percent passing the #100 sieve: 4 %

Cumulative percent passing the #200 sieve: 2.6 %

General comments (publicly viewable) (Max 1000 characters):

Test was verified on 5/17/2019 ✔