Summary for Test 2019-03-13-15-3
Test performed: AASHTO T275-07r12Project Information
| Project Identifiers | Project ID: 66667 DEA: JMFPP EFIS: 0019000043 |
|---|---|
| DIST-CO-RTE-PM | 59--- |
| Award Date | Not set |
| Closeout Date | Not set |
| Work Description | Special project for submitting Sample information for JMF Prequalification Program. |
| Location Description | Not set |
| QA Service Level | NOT VERIFIED |
Sample Information
| Sample Taken Date | 03/13/2019 | Sample Unique Key | 15 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 03/27/2019 |
| Sample type | Verification | A brief description of the sample | Boxes of HMA, Cans of Asphalt and LAS |
| The quantity of what the sample constitutes | 1/4 of Section 39 JMF verification samples | From where was the sample collected | Other |
| First name of sampler or witnessed by | Brent | Last name of sampler or witnessed by | Barber |
| Title of sampler | Field Inspector | Telephone number of sampler | 805-4410187 |
| Laboratory sample identification | 19-J-015 | Linked DIME Sample ID | |
| The fabricator/manufacturer/facility name | Papich Paso Robles | Transportation Laboratory (TL) Number | D5 |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | N/A | Structure unique identifier | Not set |
| Structure name | Not set | Bid Item | Not set |
Material Information
| Material Type | Hot Mix Asphalt | HMA Type | Type A HMA |
|---|---|---|---|
| HMA Grading | 3/4 inch | Lot number | Unknown |
| Sublot number | Unknown | HMA Mix Number | Not set |
| Binder content (%) | Not set | Virgin binder PG | Not set |
| Design binder PG | Not set | Binder Supplier | Not set |
| RAP content (%) | Not set | WMA Additives | Not set |
| Antistrip type | Not set |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2019-03-13-15
DIME Test ID: 2019-03-13-15-3
Testing Lab: CT D05 - San Luis Obispo District Laboratory
Test Method: AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)
Test Release Date: 2019-04-22
Test Results
Number of tests: 3
What test procedure is performed?: Method A
Input Type: Measured
Tester's full name: Eric Atkins
Date of test: 04/18/2019
Mass of the dry specimen in air: 4557.1 g
Mass of the dry specimen plus paraffin coating in air: 4615.2 g
Mass of the dry specimen plus paraffin coating in water: 2645.3 g
Specific gravity of the paraffin at 25 ± 1°C (77 ± 1.8°F): 0.9
Mass 2 of the dry specimen in air: 4583.6 g
Mass 2 of the dry specimen plus paraffin coating in air: 4644.9 g
Mass 2 of the dry specimen plus paraffin coating in water: 2663.3 g
Specific gravity 2 of the paraffin at 25 ± 1°C (77 ± 1.8°F): 0.9
Mass 3 of the dry specimen in air: 4554.6 g
Mass 3 of the dry specimen plus paraffin coating in air: 4613.0 g
Mass 3 of the dry specimen plus paraffin coating in water: 2647.5 g
Specific gravity 3 of the paraffin at 25 ± 1°C (77 ± 1.8°F): 0.9
Bulk Specific Gravity: 2.392
Bulk Specific Gravity 2: 2.395
Bulk Specific Gravity 3: 2.396
Average Bulk Specific Gravity: 2.394
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 4/22/2019 ✔