Summary for Test 2019-03-08-10-5
Test performed: ASTM D624-00-re12Project Information
| Project Identifiers | Project ID: 213229 DEA: 050A0504 EFIS: 0500000007 |
|---|---|
| DIST-CO-RTE-PM | 05-SB-1-15.6 |
| Award Date | 12/14/2018 |
| Closeout Date | 08/17/2022 |
| Work Description | BRIDGE REPLACEMENT, RETAINING WALL AND FISH PASSAGE. |
| Location Description | SANTA BARBARA COUNTY NEAR LOMPOC AT SALSIPUEDES CREEK BRIDGE |
| QA Service Level | 1 (Verified on 03/23/2018) |
Sample Information
| Sample Taken Date | 03/08/2019 | Sample Unique Key | 10 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 03/11/2019 |
| Sample type | Quality Assurance | A brief description of the sample | Bearing Pad |
| The quantity of what the sample constitutes | 1 | From where was the sample collected | Manufacturer |
| First name of sampler or witnessed by | Pete | Last name of sampler or witnessed by | Etcheverry |
| Title of sampler | Telephone number of sampler | ||
| Laboratory sample identification | Linked DIME Sample ID | ||
| The fabricator/manufacturer/facility name | Scougal Rubber | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | Not set | |
| Structure name | Not set | Bid Item | Not set |
Material Information
| Material Type | SMTL TM1 - Elastomeric Bearing Pad | Mfg. Lot Number(s) | 17586-1 |
|---|---|---|---|
| Material/Compound/Elastomer ID | na | Samples Representing | 11 |
| Description (size) | 2"x14"x22" | Comments | Unknown |
| Description (Number of Shims) | 4 | Type of Bearing Pad | Steel |
| Description (Thickness of Shims) | 14 gage | Manufacturer(s) | Scougal Rubber |
| Batch Number | na |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2019-03-08-10
DIME Test ID: 2019-03-08-10-5
Testing Lab: CT HQ - Sacramento Structural Materials Testing Laboratory
Test Method: ASTM D624-00-re12: Standard Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers
Test Release Date: 2019-03-27
Test Results
Number of specimens tested: 5
Input Type: Measured
Tester's full name: Brian
Date of test: 03/13/2019
Humidity: 50 %
Temperature: 72 F
Sample 1 Median Thickness: 0.06 in
Sample 1 Tear Strength: 166.7 lbf / in
Sample 2 Median Thickness: 0.06 in
Sample 2 Tear Strength: 183.3 lbf / in
Sample 3 Median Thickness: 0.057 in
Sample 3 Tear Strength: 193 lbf / in
Sample 4 Median Thickness: 0.063 in
Sample 4 Tear Strength: 190.5 lbf / in
Sample 5 Median Thickness: 0.055 in
Sample 5 Tear Strength: 181.8 lbf / in
UTM: no data
Median of the Tear Strength Values: 183.3 lb/in
General comments (publicly viewable) (Max 1000 characters):
Test Graph
Source: Partner Data Point FileTest graph for Sample 1
Source: Partner Data Point File
Test graph for Sample 2
Source: Partner Data Point File
Test graph for Sample 3
Source: Partner Data Point File
Test graph for Sample 4
Source: Partner Data Point File
Test graph for Sample 5
Test was verified on 3/20/2019 ✔