Summary for Test 2019-03-06-2-1
Test performed: CTM 673-July 2012Project Information
| Project Identifiers | Project ID: 88888 DEA: SMTL-STOCK EFIS: SMTL-STOCK |
|---|---|
| DIST-CO-RTE-PM | 59--- |
| Award Date | Not set |
| Closeout Date | Not set |
| Work Description | Special project for SMTL stock material. Object Code: 1025. J2 DEA: 912680. |
| Location Description | Not set |
| QA Service Level | NOT VERIFIED |
Sample Information
| Sample Taken Date | 03/06/2019 | Sample Unique Key | 2 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 03/08/2019 |
| Sample type | Quality Assurance | A brief description of the sample | joint seal |
| The quantity of what the sample constitutes | 600' | From where was the sample collected | Manufacturer |
| First name of sampler or witnessed by | David | Last name of sampler or witnessed by | Simon |
| Title of sampler | Telephone number of sampler | ||
| Laboratory sample identification | Linked DIME Sample ID | ||
| The fabricator/manufacturer/facility name | Watson Bowman | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | Not set | |
| Structure name | Not set |
Material Information
| Material Type | SMTL TM2 - Type B Elastomeric Joint Seal | Mfg. Lot Number(s) | 0619157 |
|---|---|---|---|
| Manufacturer(s) | Watson Bowman | Temperature | 72 |
| Humidity | 50 | Comments | Unknown |
| Joint Seal Size | 5" |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2019-03-06-2
DIME Test ID: 2019-03-06-2-1
Testing Lab: CT HQ - Sacramento Structural Materials Testing Laboratory
Test Method: CTM 673-July 2012: Method of Determining Movement Rating of Type B1 and B2 Preformed Elastomeric Joint Seals
Test Release Date: 2019-03-27
Test Results
Input Type: Measured
Tester's full name: Steve
Date of test: 03/12/2019
UTM: 11KIP
Temperature: 72 ?F
Humidity: 50 %
Load at W1: 123.921 lbs
Width at 4 x Load at W1: 2.12633 in
Nominal Width: 5 in
Measured Maximum Uncompressed Width: 5.1325 in
Measured Minimum Uncompressed Width: 5.009 in
Minimum Uncompressed Width as Specified by the Manufacturer (MUWASBM): 5.07 in
Height of Contact Face: 4.9595 in
Length: no data
Spec Minimum Uncompressed Width: 5.009 in
Area (5 Times of the Height of Contact Face): 24.798 sqin
Half of the Spec Minimum Uncompressed Width: 2.535 in
85 Percent of the Spec Minimum Uncompressed Width: 4.25765 in
3 Times of the Area: 74.394 sqin
4 Times of the Load at W1: 495.686 in
W1 (US Units): 4.258 in
W1 (Metric Units): 108.144 millimeters
W2 (US Units): 2.126 in
W2 (Metric Units): 54.009 millimeters
Satisfactory of MR of (US Units): 2.131 in
Satisfactory of MR of (Metric Units): 54.136 millimeters
Optional W1 Measurement 1: 4.2577 in
Optional W1 Measurement 2: 74.89 sqin
General comments (publicly viewable) (Max 1000 characters):
Test Graph
Test was verified on 3/20/2019 ✔