Summary for Test 2019-01-11-8-9
Test performed: AASHTO T308-10Project Information
| Project Identifiers | Project ID: 213718 DEA: 071XJ704 EFIS: 0719000092 |
|---|---|
| DIST-CO-RTE-PM | 07-VEN-1-4.75/5.25, 4.75-5.25 |
| Award Date | 10/19/2018 |
| Closeout Date | 04/30/2020 |
| Work Description | Repair eroded support slopes, shoulders and utilities and install RSP to prevent erosion from high surf |
| Location Description | Not set |
| QA Service Level | 1 (Verified on 04/30/2020) |
Sample Information
| Sample Taken Date | 01/11/2019 | Sample Unique Key | 8 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 01/15/2019 |
| Sample type | Department Acceptance | A brief description of the sample | HMA-A 3/4" R15 PG64-16/10 (0.5% LAS) |
| The quantity of what the sample constitutes | unknown | From where was the sample collected | Source |
| First name of sampler or witnessed by | unknown | Last name of sampler or witnessed by | unknown |
| Title of sampler | Telephone number of sampler | ||
| Laboratory sample identification | Linked DIME Sample ID | ||
| The fabricator/manufacturer/facility name | vulcan saticoy | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | Not set | |
| Structure name | Not set | Bid Item | Not set |
Material Information
| Material Type | Hot Mix Asphalt | HMA Type | Type A HMA |
|---|---|---|---|
| HMA Grading | 3/4 inch | Lot number | Not set |
| Sublot number | Not set | HMA Mix Number | Not set |
| Binder content (%) | Not set | Virgin binder PG | Not set |
| Design binder PG | Not set | Binder Supplier | Not set |
| RAP content (%) | Not set | WMA Additives | Not set |
| Antistrip type | Not set |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2019-01-11-8
DIME Test ID: 2019-01-11-8-9
Testing Lab: CT D08 - Fontana Southern Regional Laboratory
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Test Release Date: 2019-01-31
Test Results
What temperature unit is used?: Fahrenheit
Input Type: Measured
Tester's full name: Anthony Diaz
Date of test: 01/17/2019
Test procedure used?: Method B
Mass of the specimen basket assembly: no data
Mass of the specimen and specimen basket assembly prior to ignition: no data
Mass of HMA Sample prior to ignition: 2088.7 g
Mass Loss: no data
Mass of aggregate remaining after ignition: 1977.2 g
Correction Factor (Percent by mass of HMA Specimen): 0.33 %
Moisture Content: 0.00 %
Temperature Compensation Factor: no data
Test Temperature: 538 F
Corrected Asphalt Binder Content: 5.01 %
General comments (publicly viewable) (Max 1000 characters): CF (binder correction and temperature compensation)
Test was verified on 1/31/2019 ✔