Summary for Test 2014-01-30-12002046-2
Test performed: ASTM C136-06Project Information
| Project Identifiers | Project ID: 9999 DEA: 00000000 EFIS: 0000000000 COOP: 99999333399 MINOR: 333333 Permit Numbers: 555555 0400NRT0000 |
|---|---|
| DIST-CO-RTE-PM | 03-SAC,OMG-888,99,80-0.6-0.6 |
| Award Date | Not set |
| Closeout Date | Not set |
| Work Description | THIS PROJECT RECORD WAS ADDED FOR DIME DEVELOPERS - DATA SUBMITTED FOR THIS PROJECT SHOULD NOT BE USED FOR ANY OTHER PURPOSES. |
| Location Description | THIS PROJECT RECORD WAS ADDED FOR DIME DEVELOPERS - DATA SUBMITTED FOR THIS PROJECT SHOULD NOT BE USED FOR ANY OTHER PURPOSES. |
| QA Service Level | 1 (Verified on 04/05/2013) |
Sample Information
| Sample Taken Date | 01/30/2014 | Sample Unique Key | 12002046 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 01/29/2014 |
| Sample type | Quality Control | A brief description of the sample | Sample is brief |
| The quantity of what the sample constitutes | 3 bags | From where was the sample collected | Source |
| First name of sampler or witnessed by | Y | Last name of sampler or witnessed by | Z |
| Title of sampler | SW | Telephone number of sampler | 1-800-123-1234 |
| Laboratory sample identification | SID1234 | Linked DIME Sample ID | 2014-01-20-00000001 |
| The fabricator/manufacturer/facility name | Source Name | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | Not set | |
| Structure name | Not set | Bid Item | Not set |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | Smara 1234 |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | Prod Name | The fabricator/manufacturer designation for the sample | Desig |
| The plant number | Plant1234 | A detailed description of where the material sample was collected | From sheelbarrow |
| Where the material sample would have been placed if not sampled | o | Primary Aggregate Nominal Size | 1 inch |
| The concrete mix design number | Mix1234 | Lot number | Not set |
| Sublot number | Not set | Aggregate Mix Number | Not set |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2014-01-30-12002046
DIME Test ID: 2014-01-30-12002046-2
Testing Lab: CT HQ - Sacramento Materials Management Branch Field Office
Test Method: ASTM C136-06: Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates
Test Release Date: 2019-01-21
Test Results
What type of gradation is being tested?: Combined Gradation
Input Type: Calculated
Tester's full name: James James
Date of test: 01/01/2014
Cumulative percent passing the 2 in. sieve: 100.1 %
Cumulative percent passing the 1 1/2 in. sieve: 95 %
Cumulative percent passing the 1 in. sieve: 80 %
Cumulative percent passing the 3/4 in. sieve: 65 %
Cumulative percent passing the 1/2 in. sieve: 55 %
Cumulative percent passing the 3/8 in. sieve: 40 %
Cumulative percent passing the #4 sieve: 32 %
Cumulative percent passing the #8 sieve: 25 %
Cumulative percent passing the #16 sieve: 20 %
Cumulative percent passing the #30 sieve: 16 %
Cumulative percent passing the #50 sieve: 7 %
Cumulative percent passing the #100 sieve: 5 %
Cumulative percent passing the #200 sieve: 0 %
General comments (publicly viewable) (Max 1000 characters): This test comments
Test was verified on 1/14/2019 ✔