Summary for Test 2018-09-11-15-6
Test performed: AASHTO T324-14Project Information
| Project Identifiers | Project ID: 213134 DEA: 024F77U4 EFIS: 0217000022 |
|---|---|
| DIST-CO-RTE-PM | 02-MOD-299-23.1/23.6, 24.5/33.5 |
| Award Date | 05/08/2018 |
| Closeout Date | 09/02/2020 |
| Work Description | BRIDGE REPLACE, ROADWAY REHAB/FULL DEPTH RECLAMATION-CEMENT + HMA |
| Location Description | MODOC COUNTY ABOUT 6 MILES WEST OF ALTURAS FROM 0.3 MILE WEST TO 0.3 MILE EAST OF CALDWELL CREEK BRIDGE AND 1.1 MILES EAST OF CALDWELL CREEK BRIDGE TO 1.7 MILES WEST OF COUNTY ROAD 75 |
| QA Service Level | 1 (Verified on 04/02/2018) |
Sample Information
| Sample Taken Date | 09/11/2018 | Sample Unique Key | 15 |
|---|---|---|---|
| Date that the sample was received by the laboratory/organization performing the testing | 09/12/2018 | Sample type | Verification |
| A brief description of the sample | 3/4-inch Type A HMA (PG 64-28 M) with ZycoTherm | The quantity of what the sample constitutes | JMF Verification |
| From where was the sample collected | Manufacturer | First name of sampler or witnessed by | x |
| Last name of sampler or witnessed by | x | Title of sampler | Unknown |
| Telephone number of sampler | Unknown | Laboratory sample identification | D77630 |
| Linked DIME Sample ID | Unknown | The fabricator/manufacturer/facility name | Hat Creek - Shaw Pit Facility |
| Transportation Laboratory (TL) Number | Unknown | Inspector Lot Number from the Transportation Laboratory (TL) Form | JMF 18-18-S1 |
| Structure unique identifier | Not set | Structure name | Not set |
| Bid Item | Not set |
Material Information
| Material Type | Hot Mix Asphalt | HMA Type | Type A HMA |
|---|---|---|---|
| HMA Grading | 3/4 inch | Lot number | Not set |
| Sublot number | Not set | HMA Mix Number | Not set |
| Binder content (%) | Not set | Virgin binder PG | Not set |
| Design binder PG | Not set | Binder Supplier | Not set |
| RAP content (%) | Not set | WMA Additives | Not set |
| Antistrip type | Not set | HMA Pay | No |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2018-09-11-15
DIME Test ID: 2018-09-11-15-6
Testing Lab: CT D02 - Redding Northern Regional Laboratory
Test Method: AASHTO T324-14: Standard Method of Test for Hamburg Wheel-Track Testing of Compacted Asphalt Mixtures (Hamburg Wheel Track)
Test Release Date: 2018-09-20
Test Results
Input Type: Calculated
Tester's full name: Terry McCormick
Date of test: 09/18/2018
Specified minimum number of passes at ½” rut depth, or number of passes at ½” rut depth average: no data
Impression at specified number of passes average: no data
Specified minimum number of passes at ½” rut depth, or number of passes at ½” rut depth if applicable (Wheel A): no data
Specified minimum number of passes at ½” rut depth, or number of passes at ½” rut depth if applicable (Wheel B): no data
Impression at specified number of passes, or specified maximum impression if applicable (Wheel A): no data
Impression at specified number of passes, or specified maximum impression if applicable (Wheel B): no data
Stripping Inflection Point (Wheel A): 16800
Stripping Inflection Point (Wheel B): no data
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 9/20/2018 ✔