Summary for Test 2018-07-11-8-1
Test performed: CONCLP 3-16Project Information
| Project Identifiers | Project ID: 213139 DEA: 051H6604 EFIS: 0516000122 |
|---|---|
| DIST-CO-RTE-PM | 05-MON-1-11.7/63.0 |
| Award Date | 04/12/2018 |
| Closeout Date | 12/30/2019 |
| Work Description | POLYESTER CONCRETE OVERLAY, METHACRYLATE DECK SEAL, JOINT SEAL |
| Location Description | MONTEREY COUNTY AT VARIOUS LOCATIONS FROM WILLOW CREEK BRIDGE TO GARRAPATA CREEK BRIDGE |
| QA Service Level | 1 (Verified on 06/04/2018) |
Sample Information
| Sample Taken Date | 07/11/2018 | Sample Unique Key | 8 |
|---|---|---|---|
| Date that the sample was received by the laboratory/organization performing the testing | 07/11/2018 | Sample type | Quality Control |
| A brief description of the sample | 1 gallon can | The quantity of what the sample constitutes | 36 Totes |
| From where was the sample collected | Source | First name of sampler or witnessed by | Chris |
| Last name of sampler or witnessed by | Nunes | Title of sampler | Unknown |
| Telephone number of sampler | Unknown | Laboratory sample identification | Unknown |
| Linked DIME Sample ID | Unknown | The fabricator/manufacturer/facility name | Kwik bond and Reichhold |
| Transportation Laboratory (TL) Number | Sacramento Caltrans lab | Inspector Lot Number from the Transportation Laboratory (TL) Form | Unknown |
| Structure unique identifier | Not set | Structure name | Not set |
| Bid Item | Not set |
Material Information
| Material Type | Polyester | Mfg. Lot Number(s) | 1130393 |
|---|---|---|---|
| Batch Number | 1130393 | Mix number | 1130393 |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2018-07-11-8
DIME Test ID: 2018-07-11-8-1
Testing Lab: CT HQ - Sacramento Concrete Testing Laboratory
Test Method: CONCLP 3-16: Polyester Resin
Test Release Date: 2018-07-27
Test Results
Input Type: Measured
Tester's full name: Mike Mullins
Date of test: 07/27/2018
Viscosity ASTM D 2196, RVT, No. 1 spindle 75 to 200 cps @ 20 RPM, 77°F: 104
Specific gravity ASTM D 1475 1.05 to 1.10 @ 77°F: 1.08
Conditioning (18/25/50 + 5/70) Elogation ASTM D 638, minimum 35%: 62
Tensile Strength ASTM D 638 Type 1 @ 0.45 in/min, minimum 2500 psi: 2903
Styrene ASTM D 2369 40% to 50 %: 46
PCC - SSD bond strength CTM 551 500 psi minimun @ 24 hours: 717
Static Volatile Emissions, SCAQMD 309-91, maximum loss 1.0 grams: 0.2
General comments (publicly viewable) (Max 1000 characters): accepted suppliers results
Test was verified on 7/27/2018 ✔