Summary for Test 2018-04-12-8-2
Test performed: AASHTO T104-99r16Project Information
| Project Identifiers | Project ID: 212497 DEA: 024E0204 EFIS: 0200020196 |
|---|---|
| DIST-CO-RTE-PM | 02-SHA-299-77.8/79.7 |
| Award Date | 02/01/2018 |
| Closeout Date | 08/14/2019 |
| Work Description | PULVERIZE AND RECONSTRUCT PAVEMENT, AND WIDEN WITH AB, HMA, & RHMA |
| Location Description | SHASTA COUNTY NEAR BURNEY FROM 0.2 MILE WEST OF SONOMA STREET TO 0.3 MILE WEST OF ROUTE 89 |
| QA Service Level | 1 (Verified on 06/06/2017) |
Sample Information
| Sample Taken Date | 04/12/2018 | Sample Unique Key | 8 |
|---|---|---|---|
| Date that the sample was received by the laboratory/organization performing the testing | 05/09/2018 | Sample type | Annual Source Testing |
| A brief description of the sample | Coarse and fine aggregate | The quantity of what the sample constitutes | 1 bag |
| From where was the sample collected | Source | First name of sampler or witnessed by | Tofael |
| Last name of sampler or witnessed by | Anwar | Title of sampler | Unknown |
| Telephone number of sampler | Unknown | Laboratory sample identification | 18-0083 |
| Linked DIME Sample ID | Unknown | The fabricator/manufacturer/facility name | Hat Creek - Shaw Pit Facility |
| Transportation Laboratory (TL) Number | C853528 | Inspector Lot Number from the Transportation Laboratory (TL) Form | Unknown |
| Structure unique identifier | Not set | Structure name | Not set |
| Bid Item | Not set |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-25-0008::SHAW PIT |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | Unknown | The fabricator/manufacturer designation for the sample | Unknown |
| The plant number | Unknown | A detailed description of where the material sample was collected | Stockpile |
| Where the material sample would have been placed if not sampled | Unknown | Primary Aggregate Nominal Size | 3/4 inch |
| The concrete mix design number | Unknown | Lot number | Not set |
| Sublot number | Not set | Aggregate Mix Number | Not set |
| HMA Pay | No |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2018-04-12-8
DIME Test ID: 2018-04-12-8-2
Testing Lab: CT HQ - Sacramento Aggregate Testing Laboratory
Test Method: AASHTO T104-99r16: Standard Method of Test for Soundness of Aggregate by Use of Sodium Sulfate or Magnesium Sulfate (Soundness)
Test Release Date: 2018-06-08
Test Results
Percentage of the total sample represented by each size
Size of aggregate being tested: Fine Aggregate
What type of solution was used?: Sodium sulfate
What was the condition of the solution?: Previously used
Number of immersion cycles performed: 5
Input Type: Calculated
Tester's full name: Phillip Montes
Date of test: 06/08/2018
Percentage of ⅜ inch x No. 4 material loss: no data
Percentage of No. 4 x 8 material loss: no data
Percentage of No. 8 x 16 material loss: no data
Percentage of No. 16 x 30 material loss: no data
Percentage of No. 30 x 50 material loss: no data
Fine weighted average loss: 9.2 %
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 6/8/2018 ✔