Summary for Test 2018-05-15-1-8
Test performed: ASTM E18-15Project Information
| Project Identifiers | Project ID: 211513 DEA: 120M4904 EFIS: 1212000090 |
|---|---|
| DIST-CO-RTE-PM | 12-ORA-5-1.2/2.2 |
| Award Date | 09/20/2016 |
| Closeout Date | 01/09/2020 |
| Work Description | WIDEN FWY AND BRIDGE AND CONSTRUCT RW, SOUND WALL, AND CONC BARRIERS. |
| Location Description | ORANGE COUNTY IN SAN CLEMENTE FROM 0.1 MILE NORTH OF AVENIDA MENDOCINO OVERCROSSING TO 0.2 MILE SOUTH OF AVENIDA PRESIDIO UNDERCROSSING |
| QA Service Level | 1 (Verified on 11/03/2016) |
Sample Information
| Sample Taken Date | 05/15/2018 | Sample Unique Key | 1 |
|---|---|---|---|
| Date that the sample was received by the laboratory/organization performing the testing | 05/25/2018 | Sample type | Department Acceptance |
| A brief description of the sample | A325 Fastener Assembly | The quantity of what the sample constitutes | 20 |
| From where was the sample collected | Source | First name of sampler or witnessed by | Prakash |
| Last name of sampler or witnessed by | Patel | Title of sampler | |
| Telephone number of sampler | 5626654686 | Laboratory sample identification | |
| Linked DIME Sample ID | The fabricator/manufacturer/facility name | SLSB | |
| Transportation Laboratory (TL) Number | 102 | Inspector Lot Number from the Transportation Laboratory (TL) Form | L1101018 |
| Structure unique identifier | Not set | Structure name | Not set |
| Bid Item | Not set |
Material Information
| Material Type | SMTL TM3 - Fastener Assembly | Rocap Number(s) | |
|---|---|---|---|
| Heat Number(s) | Nut Mfg. Lot Number(s) | ||
| Washer Mfg. Lot Number(s) | Bolt Specification | ASTM A325 | |
| Bolt Length(s) | 2-1/4" | Nut Specification | A563 |
| Washer Specification | F436 | Finish | Mech. Galv |
| Diameter/Size | 3/4 | Bolt Mfg. Lot Number | |
| Rocap Test Requirement(s) | No | Lubricant Requirements(s) | No |
| Washer Inner Diameter(s) | Bolt Mill Supplier | Not set | |
| Nut Mill Supplier | Not set | Washer Mill Supplier | Not set |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2018-05-15-1
DIME Test ID: 2018-05-15-1-8
Testing Lab: CT HQ - Sacramento Structural Materials Testing Laboratory
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Test Release Date: 2018-06-13
Test Results
Input Type: Calculated
Tester's full name: Brian Ewing
Date of test: 06/04/2018
Sample No.: 1A
Rocap Number: no data
Heat Number(s): no data
Mfg. Lot Number: M4664
Finish Coating: ASTM B695 - Mech Galv
Product Markings: A325 SL USA
Size: .75 in
Bolt Length: 2.25 in
Hardness Reading Scale: C Scale
Spacing: Ok
Hardness Reading Average: 30.17
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 6/6/2018 ✔