Summary for Test 2026-09-16-38-1
Test performed: ASTM C39-17aProject Information
| Project Identifiers | Project ID: 994418 DEA: 040J5504 EFIS: 0414000012 |
|---|---|
| DIST-CO-RTE-PM | 04-ALA-84-17.2/17.2 |
| Award Date | 02/03/2026 |
| Closeout Date | Not set |
| Work Description | REPLACE BRIDGE, WIDEN ROADWAY, & CONSTRUCT SIDEWALKS. |
| Location Description | ALAMEDA COUNTY AT SUNOL FROM SILVER SPRING ROAD UNDERPASS TO PLEASANTON SUNOL ROAD |
| QA Service Level | 1 (Verified on 12/01/2022) |
Sample Information
| Sample Taken Date | 09/16/2026 | Sample Unique Key | 38 |
|---|---|---|---|
| Date that the sample was received by the laboratory/organization performing the testing | 09/21/2026 | Sample type | Quality Assurance |
| A brief description of the sample | Structural Concrete | The quantity of what the sample constitutes | 117 CY |
| From where was the sample collected | Job Site | First name of sampler or witnessed by | Christian |
| Last name of sampler or witnessed by | Haastrup | Title of sampler | ASR |
| Telephone number of sampler | 5102246772 | Laboratory sample identification | |
| Linked DIME Sample ID | The fabricator/manufacturer/facility name | Central Concrete | |
| Transportation Laboratory (TL) Number | Inspector Lot Number from the Transportation Laboratory (TL) Form | ||
| Structure unique identifier | 01-330774 | Structure name | Arroyo de la Laguna Bridge |
| Bid Item | 3938237 |
Material Information
| Material Type | Concrete | The concrete mix design number | D10115EA |
|---|---|---|---|
| The truck number from where the sample was collected | 0610 | The batch plant ticket number from where the sample was collected | 216655 |
| Concrete batch plant | Central Concrete | The fabricator/manufacturer designation for the sample | Plant |
| A detailed description of where the material sample was collected | Back of Truck | Where the material sample would have been placed if not sampled | RW 215 FOOTING |
| From Lot No. | Bag Lot No. |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2026-09-16-38
DIME Test ID: 2026-09-16-38-1
Testing Lab: CT HQ - Vallejo Field Laboratory
Test Method: ASTM C39-17a: Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
Test Release Date: 2026-10-14
Test Results
Unit system used?: US Units
Number of specimens: 3
Test performed: With no density determined
Input Type: Measured
Tester's full name: Nikhil Moon
Date of test: 10/14/2026
Capped in accordance with?: ASTM C1231 - Unbonded Elastomeric Pad Cap
Average diameter of cylinder 1: 4.00 in
Average diameter of cylinder 2: 4.00 in
Average diameter of cylinder 3: 4.00 in
Maximum load on cylinder 1: 65990 lb
Maximum load on cylinder 2: 66870 lb
Maximum load on cylinder 3: 65110 lb
Type of fracture pattern of cylinder 1: 3
Type of fracture pattern of cylinder 2: 3
Type of fracture pattern of cylinder 3: 2
Comment on any defect in either specimen or caps (Max 250 Characters): no data
Correction factor for cylinder 1: 1.00
Correction factor for cylinder 2: 1.00
Correction factor for cylinder 3: 1.00
Age of specimen: 28 days
Age of specimen in hours: 0 hours
Cross sectional area of cylinder 1: 12.57 in^2
Cross sectional area of cylinder 2: 12.57 in^2
Cross sectional area of cylinder 3: 12.57 in^2
Compressive strength of cylinder 1: 5249.8 psi
Compressive strength of cylinder 2: 5319.8 psi
Compressive strength of cylinder 3: 5179.8 psi
Compressive strength (to nearest 10 psi): 5250 psi
General comments (publicly viewable) (Max 1000 characters): 28 day break
Test was verified on 10/14/2026 ✔