Summary for Test 2026-09-11-72-2
Test performed: AASHTO T308-25Project Information
| Project Identifiers | Project ID: 1002539 DEA: 042X7104 EFIS: 0425000144 |
|---|---|
| DIST-CO-RTE-PM | 04-SOL--unknown |
| Award Date | 06/09/2026 |
| Closeout Date | Not set |
| Work Description | HM1 Pavement |
| Location Description | SOLANO COUNTY NEAR DIXON ON ROUTE 80 AT PEDRICK ROAD OVERCROSSING AND ON ROUTE 113 FROM ROUTE 12 TO 0.3 MILE SOUTH OF PARKWAY BOULEVARD |
| QA Service Level | 1 (Verified on 08/11/2026) |
Sample Information
| Sample Taken Date | 09/11/2026 | Sample Unique Key | 72 |
|---|---|---|---|
| Date that the sample was received by the laboratory/organization performing the testing | 09/14/2026 | Sample type | Quality Assurance |
| A brief description of the sample | 3/4"WMA-Rap 15% | The quantity of what the sample constitutes | 2250-3000 Tons |
| From where was the sample collected | Supplier | First name of sampler or witnessed by | Cody |
| Last name of sampler or witnessed by | Cordero | Title of sampler | |
| Telephone number of sampler | Laboratory sample identification | ||
| Linked DIME Sample ID | The fabricator/manufacturer/facility name | Teichert Woodland | |
| Transportation Laboratory (TL) Number | Inspector Lot Number from the Transportation Laboratory (TL) Form | ||
| Structure unique identifier | Structure name | ||
| Bid Item | Not set |
Material Information
| Material Type | Hot Mix Asphalt | HMA Type | Type A HMA |
|---|---|---|---|
| HMA Grading | 3/4 inch | Lot number | 1 |
| Sublot number | 4 | HMA Mix Number | |
| Binder content (%) | 0.0 | Virgin binder PG | |
| Design binder PG | Binder Supplier | ||
| RAP content (%) | Not set | WMA Additives | |
| Antistrip type |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2026-09-11-72
DIME Test ID: 2026-09-11-72-2
Testing Lab: CT D04 - Concord Field Laboratory
Test Method: AASHTO T308-25: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Test Release Date: 2026-10-07
Test Results
What temperature unit is used?: Celsius
Input Type: Calculated
Tester's full name: Henry Concepcion
Date of test: 09/14/2026
Test procedure used?: Method A
Mass of HMA Sample prior to ignition: 2074.7 g
Mass Loss: 119.0 g
Correction Factor (Percent by mass of HMA Specimen): 0.75 %
Moisture Content: 0.00 %
Temperature Compensation Factor: 0.12 %
Test Temperature: 482 C
Corrected Asphalt Binder Content: 4.87 %
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 10/7/2026 ✔