Summary for Test 2026-05-29-78-8
Test performed: CTM 521-June 2020Project Information
| Project Identifiers | Project ID: 1000709 DEA: 041Y6904 EFIS: 0423000015 |
|---|---|
| DIST-CO-RTE-PM | 04-ALA,ALA-92-14.4/18.8 |
| Award Date | 12/01/2025 |
| Closeout Date | Not set |
| Work Description | ALAMEDA & SAN MATEO HAYWARD TRESTLE REPAIR AND HIGH RISE PIER REPAIR. |
| Location Description | ALAMEDA AND SAN MATEO COUNTIES AT VARIOUS LOCATIONS FROM 7.0 MILES WEST OF TOLL PLAZA TO 0.2 MILE WEST OF TOLL PLAZA |
| QA Service Level | 1 (Verified on 04/10/2025) |
Sample Information
| Sample Taken Date | 05/29/2026 | Sample Unique Key | 78 |
|---|---|---|---|
| Date that the sample was received by the laboratory/organization performing the testing | 05/29/2026 | Sample type | Quality Control |
| A brief description of the sample | 4x8 Cylinders | The quantity of what the sample constitutes | 35 |
| From where was the sample collected | Job Site | First name of sampler or witnessed by | Mitchell |
| Last name of sampler or witnessed by | Whitlock | Title of sampler | QC Field Technician |
| Telephone number of sampler | Laboratory sample identification | 80477LP-TPH Set 1 | |
| Linked DIME Sample ID | The fabricator/manufacturer/facility name | Precision Concrete Matrerials | |
| Transportation Laboratory (TL) Number | Inspector Lot Number from the Transportation Laboratory (TL) Form | ||
| Structure unique identifier | Structure name | Batch Plant | |
| Bid Item | Not set |
Material Information
| Material Type | Concrete | The concrete mix design number | 80477LP-TPH |
|---|---|---|---|
| The truck number from where the sample was collected | Load 1 | The batch plant ticket number from where the sample was collected | 0 |
| Concrete batch plant | Precision Concrete Materials | The fabricator/manufacturer designation for the sample | |
| A detailed description of where the material sample was collected | Batch Plant | Where the material sample would have been placed if not sampled | 0 |
| From Lot No. | 1 | Bag Lot No. | 1 |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2026-05-29-78
DIME Test ID: 2026-05-29-78-8
Testing Lab: G3 Quality, Incorporated - Cerritos
Test Method: CTM 521-June 2020: Method of Test for Compressive Strength of Molded Concrete Cylinders
Test Release Date: 2026-10-08
Test Results
Unit system used?: US Units
Number of specimens: 3
Test performed: With no density determined
Input Type: Calculated
Tester's full name: Valentin Gonzalez
Date of test: 05/30/2026
Capped in accordance with?: ASTM C1231 - Unbonded Elastomeric Pad Cap
Average diameter of cylinder 1: 4.00 in
Average diameter of cylinder 2: 4.00 in
Average diameter of cylinder 3: 4.00 in
Maximum load on cylinder 1: 47360 lb
Maximum load on cylinder 2: 45660 lb
Maximum load on cylinder 3: 45310 lb
Type of fracture pattern of cylinder 1: 2
Type of fracture pattern of cylinder 2: 2
Type of fracture pattern of cylinder 3: 3
Comment on any defect in either specimen or caps (Max 250 Characters): no data
Correction factor for cylinder 1: 1.00
Correction factor for cylinder 2: 1.00
Correction factor for cylinder 3: 1.00
Age of specimen: 1 days
Age of specimen in hours: 0 hours
Cross sectional area of cylinder 1: 12.57 in^2
Cross sectional area of cylinder 2: 12.57 in^2
Cross sectional area of cylinder 3: 12.57 in^2
Compressive strength (to nearest 10 psi): 3670 psi
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 10/8/2026 ✔