Summary for Test 2026-09-11-25-1
Test performed: AASHTO T27-14Project Information
| Project Identifiers | Project ID: 214649 DEA: 07316004 EFIS: 0715000194 |
|---|---|
| DIST-CO-RTE-PM | 07-LA-14-60.70 |
| Award Date | 02/07/2023 |
| Closeout Date | Not set |
| Work Description | REHABILITATION FOR THE ON/OFF RAMPS AND ADJACENT SHOULDERS. UPGRADING METAL BEAM GUARDRAILS, AC DIKES, SIGN PANELS, CURB RAMPS, TRAFFIC LOOPS DETECTORS, AND SOME OTHER HIGHWAY APPURTENANCES. |
| Location Description | ROUTE 14 FROM PALMDALE BLVD TO KERN COUNTRY LINE. |
| QA Service Level | 1 (Verified on 01/29/2020) |
Sample Information
| Sample Taken Date | 09/11/2026 | Sample Unique Key | 25 |
|---|---|---|---|
| Date that the sample was received by the laboratory/organization performing the testing | 09/14/2026 | Sample type | Verification |
| A brief description of the sample | 3/4" RHMA G SP 0.5% LAS | The quantity of what the sample constitutes | 6 Bags of Agg, 1 Quart of Crum Rubber, 1 Quart of Hi-Nat |
| From where was the sample collected | Manufacturer | First name of sampler or witnessed by | Michael |
| Last name of sampler or witnessed by | Michael QC-Vulcan | Title of sampler | QC |
| Telephone number of sampler | Laboratory sample identification | 0562G-26 | |
| Linked DIME Sample ID | The fabricator/manufacturer/facility name | Vulcan - Sun Valley | |
| Transportation Laboratory (TL) Number | Inspector Lot Number from the Transportation Laboratory (TL) Form | ||
| Structure unique identifier | Structure name | ||
| Bid Item | Not set |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-19-0035 |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
| The plant number | A detailed description of where the material sample was collected | Belt Cut at Plant | |
| Where the material sample would have been placed if not sampled | Primary Aggregate Nominal Size | 3/4 inch | |
| The concrete mix design number | Lot number | ||
| Sublot number | Aggregate Mix Number |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2026-09-11-25
DIME Test ID: 2026-09-11-25-1
Testing Lab: CT D08 - Fontana Southern Regional Laboratory
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Test Release Date: 2026-10-12
Test Results
What type of gradation is being tested?: Combined Gradation
Individual or cumulative mass retained on each sieve?: Cumulative Mass Retained
Does this test use 1/4 sieve? (question for HMA Gradation Type): Yes
Has the fine aggregate sample been reduced?: No
Input Type: Calculated
Tester's full name: DM
Date of test: 09/15/2026
| Cumulative Percent Passing | ||||||
|---|---|---|---|---|---|---|
| 100 % | ||||||
| 100 % | ||||||
| 100 % | ||||||
| 97 % | ||||||
| 83 % | ||||||
| 70 % | ||||||
| 34 % | ||||||
| 19 % | ||||||
| 14 % | ||||||
| 11 % | ||||||
| 8 % | ||||||
| 6 % | ||||||
| 0.9 % | ||||||
General comments (publicly viewable) (Max 1000 characters): Combined Virgin Aggregate Gradation.
Test was verified on 10/12/2026 ✔