Summary for Test 2026-09-17-68-1
Test performed: AASHTO T308-25Project Information
| Project Identifiers | Project ID: 995494 DEA: 081K4904 EFIS: 0819000050 |
|---|---|
| DIST-CO-RTE-PM | 08-SBD-40-R105.1/R105.9 |
| Award Date | 05/28/2024 |
| Closeout Date | Not set |
| Work Description | BUILDING WORK, HMA, AND TEMPORARY PORTABLE SANITARY FACILITIES. |
| Location Description | SAN BERNARDINO COUNTY ABOUT 36 MILES WEST OF NEEDLES FROM 2.1 MILES TO 1.3 MILES WEST OF GOFFS ROAD UNDERCROSSING |
| QA Service Level | 1 (Verified on 01/18/2024) |
Sample Information
| Sample Taken Date | 09/17/2026 | Sample Unique Key | 68 |
|---|---|---|---|
| Date that the sample was received by the laboratory/organization performing the testing | 09/17/2026 | Sample type | Acceptance |
| A brief description of the sample | 3/4" RHMA-G | The quantity of what the sample constitutes | 2 boxes, 200.00 Tons out |
| From where was the sample collected | Manufacturer | First name of sampler or witnessed by | Luke |
| Last name of sampler or witnessed by | Hall | Title of sampler | |
| Telephone number of sampler | Laboratory sample identification | ||
| Linked DIME Sample ID | The fabricator/manufacturer/facility name | Granite-Desert Hot Springs | |
| Transportation Laboratory (TL) Number | Inspector Lot Number from the Transportation Laboratory (TL) Form | ||
| Structure unique identifier | Structure name | ||
| Bid Item | Not set |
Material Information
| Material Type | Hot Mix Asphalt | HMA Type | RHMA-G |
|---|---|---|---|
| HMA Grading | 3/4 inch | Lot number | 1 |
| Sublot number | 5 | HMA Mix Number | 14820 |
| Binder content (%) | 7.5 | Virgin binder PG | PG 64-16 |
| Design binder PG | Binder Supplier | Valero | |
| RAP content (%) | 0 | WMA Additives | Yes |
| Antistrip type | Lime Marination - Lhoist |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2026-09-17-68
DIME Test ID: 2026-09-17-68-1
Testing Lab: CT D08 - Fontana Southern Regional Laboratory
Test Method: AASHTO T308-25: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Test Release Date: 2026-09-29
Test Results
What temperature unit is used?: Celsius
Input Type: Calculated
Tester's full name: Mohammed Haque
Date of test: 09/21/2026
Test procedure used?: Method A
Mass of HMA Sample prior to ignition: 2165.8 g
Mass Loss: 161.0 g
Correction Factor (Percent by mass of HMA Specimen): -0.10 %
Moisture Content: 0.00 %
Temperature Compensation Factor: 0.13 %
Test Temperature: 538 C
Corrected Asphalt Binder Content: 7.40 %
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 9/29/2026 ✔