Summary for Test 2026-09-08-3-4
Test performed: ASTM F606-21Project Information
| Project Identifiers | Project ID: 994675 DEA: 07390204 EFIS: 0722000334 |
|---|---|
| DIST-CO-RTE-PM | 07-LA-47-0.4 / 2.1 |
| Award Date | 01/24/2025 |
| Closeout Date | Not set |
| Work Description | Bridge deck replacement with lightweight precast deck panels ultra high performance concrete. Also includes: replacement of seismic sensors, upgrades to median barrier, railings, fences and guard rails. New finger joints. |
| Location Description | RTE 47 between Terminal Island and San Pedro PM 0.4/2.1 |
| QA Service Level | 1 (Verified on 08/07/2023) |
Sample Information
| Sample Taken Date | 09/08/2026 | Sample Unique Key | 3 |
|---|---|---|---|
| Date that the sample was received by the laboratory/organization performing the testing | 09/14/2026 | Sample type | Quality Assurance |
| A brief description of the sample | 7/8" x 2-1/2" F3125/F1852 A325TC Bolt Assembly | The quantity of what the sample constitutes | 1,620 |
| From where was the sample collected | Job Site | First name of sampler or witnessed by | Jayce |
| Last name of sampler or witnessed by | Groves | Title of sampler | Quailty Assurance Inspector |
| Telephone number of sampler | Laboratory sample identification | ||
| Linked DIME Sample ID | The fabricator/manufacturer/facility name | Unytite Inc | |
| Transportation Laboratory (TL) Number | Inspector Lot Number from the Transportation Laboratory (TL) Form | ||
| Structure unique identifier | Structure name | ||
| Bid Item | Not set |
Material Information
| Material Type | SMTL TM3 - Fastener Assembly | Rocap Number(s) | 43916-10990300 |
|---|---|---|---|
| Heat Number(s) | Bolt 10990300 Nut 21034750 Washer B74859 | Nut Mfg. Lot Number(s) | 43770-21034750 |
| Washer Mfg. Lot Number(s) | 43114-B74859 | Bolt Specification | ASTM A325 |
| Bolt Length(s) | 2-1/2" | Nut Specification | ASTM F436 |
| Washer Specification | ASTM A563 | Finish | MECH Galv |
| Diameter/Size | 7/8" | Bolt Mfg. Lot Number | 43916-10990300 |
| Rocap Test Requirement(s) | Yes | Lubricant Requirements(s) | Lub Nut |
| Washer Inner Diameter(s) | Point 946 in | Bolt Mill Supplier | Not set |
| Nut Mill Supplier | Not set | Washer Mill Supplier | Not set |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2026-09-08-3
DIME Test ID: 2026-09-08-3-4
Testing Lab: CT HQ - Sacramento Structural Materials Testing Laboratory
Test Method: ASTM F606-21: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)
Test Release Date: 2026-09-22
Test Results
Number of Samples: 1
Input Type: Measured
Tester's full name: Steven Paine
Date of test: 09/22/2026
UTM: NA
Temperature: 0 f
| Num | Sample | Bolt Mfg. Lot Number | Size (in) | Peak Load (lbf) | Peak Load (kN) | Comments | Tested By |
|---|---|---|---|---|---|---|---|
| 1 | 1A | 43770 | .875 | 80850 | 0000 | A563 Proof Load | Kleinfelder |
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 9/22/2026 ✔