Summary for Test 2026-09-17-51-2
Test performed: CTM 217-June 2011Project Information
| Project Identifiers | Project ID: 1002407 DEA: 061H9304 EFIS: 0625000101 |
|---|---|
| DIST-CO-RTE-PM | 06-KER-5-40.0/42.9, 52.8/62.6 |
| Award Date | Not set |
| Closeout Date | Not set |
| Work Description | I-5 BUTTONWILLOW PAVEMENT REHAB (PM 40.0/42.9, 52.8/62.6): COLD PLANE, RHMA-G (BWC), HMA (TYPE A), PANEL REPLACEMENT, SHOULDER BACKING, RUMBLE STRIP, THERMO STRIPING, SIGNS, MODIFY TMS |
| Location Description | CONSTRUCTION ON STATE HIGHWAY IN KERN COUNTY IN AND NEAR BUTTONWILLOW FROM 1.2 MILES SOUTH OF ROUTE 5/43 SEPARATION TO 0.1 MILE SOUTH OF KERN RIVER UTILITY ROAD OVERCROSING AND FROM 0.7 MILE NORTH OF ROUTE 5/58 SEPARATION TO LERDO AVENUE OVERCROSING |
| QA Service Level | 1 (Verified on 07/13/2026) |
Sample Information
| Sample Taken Date | 09/17/2026 | Sample Unique Key | 51 |
|---|---|---|---|
| Date that the sample was received by the laboratory/organization performing the testing | 09/21/2026 | Sample type | Acceptance |
| A brief description of the sample | Shoulder Backing | The quantity of what the sample constitutes | 1 bags of shoulder backing material |
| From where was the sample collected | Job Site | First name of sampler or witnessed by | QC |
| Last name of sampler or witnessed by | QC | Title of sampler | |
| Telephone number of sampler | Laboratory sample identification | ||
| Linked DIME Sample ID | The fabricator/manufacturer/facility name | Granite Solari Plant | |
| Transportation Laboratory (TL) Number | Inspector Lot Number from the Transportation Laboratory (TL) Form | ||
| Structure unique identifier | Structure name | ||
| Bid Item | 3957523 |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | RAP |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
| The plant number | A detailed description of where the material sample was collected | windrow | |
| Where the material sample would have been placed if not sampled | Primary Aggregate Nominal Size | 3/4 inch | |
| The concrete mix design number | Lot number | ||
| Sublot number | Aggregate Mix Number |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2026-09-17-51
DIME Test ID: 2026-09-17-51-2
Testing Lab: CT D06 - Bakersfield Field Laboratory
Test Method: CTM 217-June 2011: Method of Test for Sand Equivalent
Test Release Date: 2026-09-21
Test Results
Number of tests: 1
Input Type: Measured
Tester's full name: Neale Brown
Date of test: 09/21/2026
Temperature correction: 0
Temperature of solution: 75
Clay reading (test 1): 11.8
Sand reading (test 1): 2.8
Sand equivalent (test 1): 24
Sand equivalent before temperature correction: 24
Sand equivalent after temperature correction: 24
General comments (publicly viewable) (Max 1000 characters):
Test File Attachments
| File Name | Extension | File Size | Date Uploaded | Test ID | Actions |
|---|---|---|---|---|---|
| 06-1H9304_37011_260917_Shoulderbacking | 96.27 KB | 09/21/2026 | 2026-09-17-51-2 | Info |
Test was verified on 9/21/2026 ✔