DIME - Test Summary

Summary for Test 2026-09-09-4-2

Test performed: AASHTO T84-14

Project Identifiers	Project ID: 214649 DEA: 07316004 EFIS: 0715000194
DIST-CO-RTE-PM	07-LA-14-60.70
Award Date	02/07/2023
Closeout Date	Not set
Work Description	REHABILITATION FOR THE ON/OFF RAMPS AND ADJACENT SHOULDERS. UPGRADING METAL BEAM GUARDRAILS, AC DIKES, SIGN PANELS, CURB RAMPS, TRAFFIC LOOPS DETECTORS, AND SOME OTHER HIGHWAY APPURTENANCES.
Location Description	ROUTE 14 FROM PALMDALE BLVD TO KERN COUNTRY LINE.
QA Service Level	1 (Verified on 01/29/2020)

Sample Taken Date	09/09/2026	Sample Unique Key	4
Date that the sample was received by the laboratory/organization performing the testing	09/08/2026	Sample type	Verification
A brief description of the sample	3/4"HMA-A-SP R15 0.50% LAS	The quantity of what the sample constitutes	2 Bags ea of 3/4", 1/4", 3/8", Agg; 2 Bags ea of Sand & RAP
From where was the sample collected	Manufacturer	First name of sampler or witnessed by	Christian
Last name of sampler or witnessed by	Gonzalez	Title of sampler
Telephone number of sampler		Laboratory sample identification	0559A-26
Linked DIME Sample ID		The fabricator/manufacturer/facility name	Vulcan materials
Transportation Laboratory (TL) Number		Inspector Lot Number from the Transportation Laboratory (TL) Form
Structure unique identifier		Structure name
Bid Item	Not set

Material Type	Aggregate	Source Identification (SMARA, name of Pit or Job Site)	91-19-0020, 91-19-0035
The fabricator's/manufacturer's product name for the sample		The fabricator/manufacturer designation for the sample
The plant number		A detailed description of where the material sample was collected	Belt Cut at Plant
Where the material sample would have been placed if not sampled		Primary Aggregate Nominal Size	3/4 inch
The concrete mix design number		Lot number
Sublot number		Aggregate Mix Number

DIME Sample ID: 2026-09-09-4

DIME Test ID: 2026-09-09-4-2

Testing Lab: CT D08 - Fontana Southern Regional Laboratory

Test Method: AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)

Test Release Date: 2026-10-20

Input Type: Measured

Tester's full name: FO

Date of test: 09/10/2026

Mass of saturated surface dry sample (before pycnometer) (S)	500.0 grams
Mass of the pycnometer with water and aggregate (C)	969.0 grams
Mass of the pycnometer with water (B)	656.3 grams
Mass of the oven dried sample (before pycnometer) (A)	494.4 grams
Mass of the saturated surface dry aggregate (for absorption) (S)	500.0 grams
Mass of the oven dry aggregate (for absorption) (A)	494.4 grams
Test Sample Preparation	6% Moisture
Bulk specific gravity	2.640
Bulk specific gravity (SSD Basis)	2.670
Apparent specific gravity	2.721
Absorption	1.1 %

General comments (publicly viewable) (Max 1000 characters):

Test was verified on 10/20/2026 ✔