Summary for Test 2026-08-31-17-1
Test performed: AASHTO T308-10Project Information
| Project Identifiers | Project ID: 1002572 DEA: 061H9704 EFIS: 0625000105 |
|---|---|
| DIST-CO-RTE-PM | 06-MAD-152-R0.0/15.5 |
| Award Date | Not set |
| Closeout Date | Not set |
| Work Description | MADERA COUNTY SLAB REPLACEMENT WITH DIGOUTS ON SR 59, 152. Cold plane AC, remove concrete pavement and place with HMA and RHMA. |
| Location Description | CONSTRUCTION ON STATE HIGHWAY IN MADERA COUNTY NEAR CHOWCHILLA FROM ROUTE 59/152 SEPARATION TO 0.1 MILE WEST OF ROUTE 99/152 SEPARATION. |
| QA Service Level | 1 (Verified on 08/31/2026) |
Sample Information
| Sample Taken Date | 08/31/2026 | Sample Unique Key | 17 |
|---|---|---|---|
| Date that the sample was received by the laboratory/organization performing the testing | 08/31/2026 | Sample type | Acceptance |
| A brief description of the sample | 3/4" HMA Type A 12% RAP | The quantity of what the sample constitutes | 0-750 Tons |
| From where was the sample collected | Manufacturer | First name of sampler or witnessed by | Gurjeet |
| Last name of sampler or witnessed by | Litt | Title of sampler | |
| Telephone number of sampler | Laboratory sample identification | ||
| Linked DIME Sample ID | The fabricator/manufacturer/facility name | Santa Fe Aggregate Winton | |
| Transportation Laboratory (TL) Number | Inspector Lot Number from the Transportation Laboratory (TL) Form | ||
| Structure unique identifier | Structure name | ||
| Bid Item | Not set |
Material Information
| Material Type | Hot Mix Asphalt | HMA Type | Type A HMA |
|---|---|---|---|
| HMA Grading | 3/4 inch | Lot number | 1 |
| Sublot number | 12 | HMA Mix Number | |
| Binder content (%) | 5.1 | Virgin binder PG | PG 70-10 |
| Design binder PG | PG 70-10 | Binder Supplier | SJR |
| RAP content (%) | 12 | WMA Additives | |
| Antistrip type |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2026-08-31-17
DIME Test ID: 2026-08-31-17-1
Testing Lab: CT D06 - Millbrook Field Laboratory
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Test Release Date: 2026-09-10
Test Results
What temperature unit is used?: Celsius
Input Type: Measured
Tester's full name: Tomas Silva
Date of test: 09/02/2026
Test procedure used?: Method A
Mass of the specimen basket assembly: 2925.4 g
Mass of the specimen and specimen basket assembly prior to ignition: 4999.8 g
Mass of HMA Sample prior to ignition: 2074.4 g
Mass Loss: 108.7 g
Mass of aggregate remaining after ignition: 1965.7 g
Correction Factor (Percent by mass of HMA Specimen): 0.40 %
Moisture Content: 0.00 %
Temperature Compensation Factor: 0.14 %
Test Temperature: 538 C
Corrected Asphalt Binder Content: 4.70 %
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 9/10/2026 ✔