Summary for Test 2026-08-22-29-2

Test performed: AASHTO T209-25

Project Information

Project IdentifiersProject ID: 995520
DEA: 041Y7004
EFIS: 0423000016
DIST-CO-RTE-PM04-CC,SOL-80-13.8/14.1,0.0/0.4
Award DateNot set
Closeout DateNot set
Work DescriptionAL ZAMPA BRIDGE DECK REHABILITATION REPLACE TOP COURSE
Location DescriptionCONTRA COSTA AND SOLANO COUNTIES AT CROCKETT AND IN VALLEJO FROM UNION PACIFIC RAILROAD OVERHEAD TO 0.8 MILE SOUTH OF ROUTE 80/29 SEPARATION
QA Service Level1 (Verified on 12/06/2023)

Sample Information

Sample Taken Date08/22/2026 Sample Unique Key29
Date that the sample was received by the laboratory/organization performing the testing08/22/2026 Sample typeQuality Assurance
A brief description of the sample#3/8 HMA-A 16% RAP The quantity of what the sample constitutes250 tons
From where was the sample collectedJob Site First name of sampler or witnessed byCasey
Last name of sampler or witnessed byFarrington Title of sampler
Telephone number of sampler Laboratory sample identification
Linked DIME Sample ID The fabricator/manufacturer/facility nameMartin Marrieta
Transportation Laboratory (TL) Number Inspector Lot Number from the Transportation Laboratory (TL) Form1
Structure unique identifier Structure name
Bid ItemNot set

Material Information

Material TypeHot Mix Asphalt HMA TypeType A HMA
HMA Grading3/8 inch Lot number1
Sublot number3 HMA Mix Number77S65326L1
Binder content (%)0.0 Virgin binder PG
Design binder PG Binder Supplier
RAP content (%)16 WMA Additives
Antistrip type

Test Details

DIME Sample ID: 2026-08-22-29
DIME Test ID: 2026-08-22-29-2
Testing Lab: CT D04 - Richmond Field Laboratory
Test Method: AASHTO T209-25: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)
Test Release Date: 2026-09-04

Test Results


Number of Samples: 1
What is the unit of measurement for theoretical density?: SI Units
Mass Determination: Air
Input Type: Measured
Tester's full name: Casey Farrington
Date of test: 08/25/2026
Method Performed: Mechanical Agitation - Method A
Mass of container filled with water 1: 7381.9 grams
Mass of oven-dry sample in air for Sample 1: 1518.2 grams
Mass of container filled with the sample and water for Sample 1: 8300.9 grams
Temperature of Water: 77 °F
Specific Gravity for Sample 1: 2.534
Theoretical maximum density at 25°C (77°F): 2527 kg/m^3
General comments (publicly viewable) (Max 1000 characters):

Test was verified on 9/4/2026 ✔