Summary for Test 2026-08-22-22-1
Test performed: AASHTO T308-10Project Information
| Project Identifiers | Project ID: 995520 DEA: 041Y7004 EFIS: 0423000016 |
|---|---|
| DIST-CO-RTE-PM | 04-CC,SOL-80-13.8/14.1,0.0/0.4 |
| Award Date | Not set |
| Closeout Date | Not set |
| Work Description | AL ZAMPA BRIDGE DECK REHABILITATION REPLACE TOP COURSE |
| Location Description | CONTRA COSTA AND SOLANO COUNTIES AT CROCKETT AND IN VALLEJO FROM UNION PACIFIC RAILROAD OVERHEAD TO 0.8 MILE SOUTH OF ROUTE 80/29 SEPARATION |
| QA Service Level | 1 (Verified on 12/06/2023) |
Sample Information
| Sample Taken Date | 08/22/2026 | Sample Unique Key | 22 |
|---|---|---|---|
| Date that the sample was received by the laboratory/organization performing the testing | 08/22/2026 | Sample type | Quality Assurance |
| A brief description of the sample | #3/8 HMA-A 16% RAP | The quantity of what the sample constitutes | 250 tons |
| From where was the sample collected | Job Site | First name of sampler or witnessed by | Casey |
| Last name of sampler or witnessed by | Farrington | Title of sampler | |
| Telephone number of sampler | Laboratory sample identification | ||
| Linked DIME Sample ID | The fabricator/manufacturer/facility name | Martin Marrieta | |
| Transportation Laboratory (TL) Number | Inspector Lot Number from the Transportation Laboratory (TL) Form | 1 | |
| Structure unique identifier | Structure name | ||
| Bid Item | Not set |
Material Information
| Material Type | Hot Mix Asphalt | HMA Type | Type A HMA |
|---|---|---|---|
| HMA Grading | 3/8 inch | Lot number | 1 |
| Sublot number | 1 | HMA Mix Number | 77S65326L1 |
| Binder content (%) | 0.0 | Virgin binder PG | |
| Design binder PG | Binder Supplier | ||
| RAP content (%) | 16 | WMA Additives | |
| Antistrip type |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2026-08-22-22
DIME Test ID: 2026-08-22-22-1
Testing Lab: CT D04 - Richmond Field Laboratory
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Test Release Date: 2026-09-01
Test Results
What temperature unit is used?: Celsius
Input Type: Measured
Tester's full name: Casey Farrington
Date of test: 08/22/2026
Test procedure used?: Method A
Mass of the specimen basket assembly: 2865.6 g
Mass of the specimen and specimen basket assembly prior to ignition: 4100.9 g
Mass of HMA Sample prior to ignition: 1235.3 g
Mass Loss: 83.1 g
Mass of aggregate remaining after ignition: 1152.2 g
Correction Factor (Percent by mass of HMA Specimen): 0.89 %
Moisture Content: 0.00 %
Temperature Compensation Factor: 0.24 %
Test Temperature: 482 C
Corrected Asphalt Binder Content: 5.60 %
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 9/1/2026 ✔