Summary for Test 2026-08-14-65-1
Test performed: AASHTO T315-24Project Information
| Project Identifiers | Project ID: 1001306 DEA: 023H7704 EFIS: 0218000039 |
|---|---|
| DIST-CO-RTE-PM | 02-TEH-99-0.0/12.5 |
| Award Date | Not set |
| Closeout Date | Not set |
| Work Description | VINA REHAB: PLACE HMA, INSTALL CULVERTS, AND INSTALL GUARDRAIL. |
| Location Description | TEHAMA COUNTY IN AND NEAR LOS MOLINOS FROM BUTTE COUNTY LINE TO LOS MOLINOS CREEK BRIDGE |
| QA Service Level | 1 (Verified on 06/12/2025) |
Sample Information
| Sample Taken Date | 08/14/2026 | Sample Unique Key | 65 |
|---|---|---|---|
| Date that the sample was received by the laboratory/organization performing the testing | 08/24/2026 | Sample type | JMF Verification |
| A brief description of the sample | PG 64-16 | The quantity of what the sample constitutes | 2 Quart Cans |
| From where was the sample collected | Source | First name of sampler or witnessed by | c |
| Last name of sampler or witnessed by | bryant | Title of sampler | |
| Telephone number of sampler | Laboratory sample identification | 858081 | |
| Linked DIME Sample ID | The fabricator/manufacturer/facility name | JF Shea Fawndale | |
| Transportation Laboratory (TL) Number | Inspector Lot Number from the Transportation Laboratory (TL) Form | ||
| Structure unique identifier | Structure name | ||
| Bid Item | Not set |
Material Information
| Material Type | Asphalt Binder | Performance Grade | PG 64-16 |
|---|---|---|---|
| Modified | Lot number | ||
| Sublot number | Tank number | ||
| Time of sample | HMA Supplier | JF SHEA FAWNDALE | |
| Certified Asphalt Supplier | Albina Asphalt - Klamath Falls - Klamath Falls OR | Multigrade | No |
| Multigrade Type | Asphalt Binder Mix Number | ||
| HMA Type | 3/4 RHMA-G | HMA Supplier Mix ID Number | NOT ON TL 101 |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2026-08-14-65
DIME Test ID: 2026-08-14-65-1
Testing Lab: CT HQ - Sacramento Asphalt Binder Laboratory
Test Method: AASHTO T315-24: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)
Test Release Date: 2026-08-27
Test Results
Phase: Original binder
Input Type: Measured
Tester's full name: Amare Tefera
Date of test: 08/25/2026
Test Gap: 1 mm
Test Frequency: 10.0 rad/s
Strain Amplitude: 12.06 %
Stress Amplitude: 0.153 kPa
Phase Angle (δ) (for the 10 cycles): 86.2 degree
Complex Modulus (G*) (for the 10 measurements): 1.271 kPa
Test Temperature (Specimen 1): 64.0 C
Dynamic Shear, G*/sin(δ): 1.27 kPa
General comments (publicly viewable) (Max 1000 characters): OG
Test was verified on 8/27/2026 ✔