Summary for Test 2026-08-13-58-1
Test performed: ASTM C78-18Project Information
| Project Identifiers | Project ID: 1001616 DEA: 061C0604 EFIS: 0621000014 |
|---|---|
| DIST-CO-RTE-PM | 06-KER-223-1.8/10.4 |
| Award Date | Not set |
| Closeout Date | Not set |
| Work Description | FULL DEPTH RECYCLE AND V-DITCHES. |
| Location Description | KERN COUNTY NEAR BAKERSFIELD FROM ROUTE 223/5 SEPARATION TO 0.1 MILE WEST OF ROUTE 223/99 SEPARATION |
| QA Service Level | 1 (Verified on 10/06/2025) |
Sample Information
| Sample Taken Date | 08/13/2026 | Sample Unique Key | 58 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 08/13/2026 |
| Sample type | Acceptance | A brief description of the sample | 6 Beams |
| The quantity of what the sample constitutes | JPCP-RSC | From where was the sample collected | Job Site |
| First name of sampler or witnessed by | Barrett | Last name of sampler or witnessed by | Felder |
| Title of sampler | Telephone number of sampler | ||
| Laboratory sample identification | Linked DIME Sample ID | ||
| The fabricator/manufacturer/facility name | CTS SHORT LOAD RAPID SET | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name | Bid Item | 3945947 |
Material Information
| Material Type | Concrete | The concrete mix design number | CTS-65-EHI-JCPC |
|---|---|---|---|
| The truck number from where the sample was collected | The batch plant ticket number from where the sample was collected | 1 | |
| Concrete batch plant | The fabricator/manufacturer designation for the sample | ||
| A detailed description of where the material sample was collected | Back of Truck | Where the material sample would have been placed if not sampled | |
| From Lot No. | Bag Lot No. |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2026-08-13-58
DIME Test ID: 2026-08-13-58-1
Testing Lab: CT D06 - Bakersfield Field Laboratory
Test Method: ASTM C78-18: Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
Test Release Date: 2026-08-24
Test Results
Number of specimens: 3
Unit system used?: US Units
Does the testing machine measure load or stress on the beam specimen?: Load
Fracture initiates in the tension surface: Within the Middle Third of the Span Length
Is a beam dimensional correction factor used?: No
Input Type: Measured
Tester's full name: Neale Brown
Date of test: 08/24/2026
Identification number: 2
Width of specimen: 6.0 inch
Width of specimen 2: 6.0 inch
Width of specimen 3: 6.0 inch
Depth of specimen: 6.2 inch
Depth of specimen 2: 6.2 inch
Depth of specimen 3: 6.2 inch
Span length of specimen: 18 inch
Span length of specimen 2: 18 inch
Span length of specimen 3: 18 inch
Maximum load applied: 8250 lb
Maximum load applied 2: 8790 lb
Maximum load applied 3: 7670 lb
Curing history and apparent moisture condition of the specimen: Good
If specimen was capped, ground or if leather shims were used: leather shims were used
Defects in specimen: 0
Age of specimen: 11 days
Age of specimen in hours: 0 hours
Modulus of rupture: 655 psi
Modulus of rupture 2: 695 psi
Modulus of rupture 3: 610 psi
Modulus of rupture average: 655 psi
General comments (publicly viewable) (Max 1000 characters):
Test File Attachments
| File Name | Extension | File Size | Date Uploaded | Test ID | Actions |
|---|---|---|---|---|---|
| 06-1C0604_37039_260813_2 | 283.45 KB | 08/24/2026 | 2026-08-13-58-1 | Info |
Test was verified on 8/24/2026 ✔