Summary for Test 2026-07-27-30-17
Test performed: ASTM F606-21
Warning: The test results shown on this page have been superseded and are invalid.
This information is for reference only.
Please click this
link
to view the corrected test.
Project Information
| Project Identifiers | Project ID: 1001075 DEA: 040W0304 EFIS: 0420000164 |
|---|---|
| DIST-CO-RTE-PM | 04-ALA-580-0.02/6.3 |
| Award Date | 10/16/2025 |
| Closeout Date | Not set |
| Work Description | Replace existing tolling structure with open road tolling (ORT) system at the Richmond-San Rafael. |
| Location Description | Not set |
| QA Service Level | 1 (Verified on 03/13/2025) |
Sample Information
| Sample Taken Date | 07/27/2026 | Sample Unique Key | 30 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 07/31/2026 |
| Sample type | Quality Assurance | A brief description of the sample | 3/4 x 2-1/4 A325 |
| The quantity of what the sample constitutes | 425 | From where was the sample collected | Fabricator |
| First name of sampler or witnessed by | Jason | Last name of sampler or witnessed by | Gramlick |
| Title of sampler | ASI | Telephone number of sampler | 916-639-5867 |
| Laboratory sample identification | Linked DIME Sample ID | ||
| The fabricator/manufacturer/facility name | XKT Engineering | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name | Bid Item | Not set |
Material Information
| Material Type | SMTL TM3 - Fastener Assembly | Rocap Number(s) | W000339200 |
|---|---|---|---|
| Heat Number(s) | 1000134536 1000232161 190150106 | Nut Mfg. Lot Number(s) | W000319916 |
| Washer Mfg. Lot Number(s) | E9348 | Bolt Specification | ASTM A325 |
| Bolt Length(s) | 2-1/4 | Nut Specification | ASTM A563 |
| Washer Specification | ASTM F436 | Finish | HDG |
| Diameter/Size | 3/4 | Bolt Mfg. Lot Number | W000339200 |
| Rocap Test Requirement(s) | W000339200 | Lubricant Requirements(s) | wax |
| Washer Inner Diameter(s) | 000 |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2026-07-27-30
DIME Test ID: 2026-07-27-30-17
Testing Lab: CT HQ - Sacramento Structural Materials Testing Laboratory
Test Method: ASTM F606-21: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)
Test Release Date: 2026-08-18
Test Results
Number of Bolt Samples: 2
Input Type: Measured
Tester's full name: Andrew Auvinen
Date of test: 08/12/2026
UTM: NA
Temperature: 0 f
| Num | Sample | Bolt Mfg. Lot Number | Size (in) | Peak Load (lbf) | Peak Load (kN) | Wedge Angle (deg) | Comments | Tested By |
|---|---|---|---|---|---|---|---|---|
| 1 | 1A | E9348 | 0.75 | 58450 | 0 | 0 | Nut Proof Load | WSP |
| 2 | 1B | E9348 | 0.75 | 58450 | 0 | 0 | Nut Proof Load | WSP |
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 8/18/2026 ✔
Warning: The test results shown on this page have been superseded and are invalid.
This information is for reference only.