Summary for Test 2026-06-16-102-1
Test performed: AASHTO T30-19Project Information
| Project Identifiers | Project ID: 1001960 DEA: 081J65U4 EFIS: 0824000091 |
|---|---|
| DIST-CO-RTE-PM | 08-RIV-10-0.0/R8.2 |
| Award Date | Not set |
| Closeout Date | Not set |
| Work Description | HMA, RHMA, JPCP, JPCP(RSC), and individual slab replacement (RSC). |
| Location Description | Not set |
| QA Service Level | 1 (Verified on 03/23/2026) |
Sample Information
| Sample Taken Date | 06/16/2026 | Sample Unique Key | 102 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 06/17/2026 |
| Sample type | Acceptance | A brief description of the sample | 3/4" HMA-A SP |
| The quantity of what the sample constitutes | 59.88 Tons @ 22:30 | From where was the sample collected | Manufacturer |
| First name of sampler or witnessed by | Idris | Last name of sampler or witnessed by | Najjar |
| Title of sampler | Telephone number of sampler | ||
| Laboratory sample identification | 0346A-26 | Linked DIME Sample ID | 2026-06-16-103 |
| The fabricator/manufacturer/facility name | All American Asphalt — Corona | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name | Bid Item | Not set |
Material Information
| Material Type | Hot Mix Asphalt | HMA Type | Type A HMA |
|---|---|---|---|
| HMA Grading | 3/4 inch | Lot number | |
| Sublot number | HMA Mix Number | 105793 | |
| Binder content (%) | 4.7 | Virgin binder PG | |
| Design binder PG | Binder Supplier | ||
| RAP content (%) | Not set | WMA Additives | |
| Antistrip type |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2026-06-16-102
DIME Test ID: 2026-06-16-102-1
Testing Lab: CT D08 - Fontana Field Testing Laboratory
Test Method: AASHTO T30-19: Standard Method of Test for Mechanical Analysis of Extracted Aggregate (Mechanical Analysis)
Test Release Date: 2026-08-10
Test Results
Does this test use 1/4 sieve?: No
Is an aggregate correction factor used?: Yes
Input Type: Measured
Tester's full name: MaryAnna Landaverde
Date of test: 06/25/2026
| Cumulative Mass Retained | Correction Factor | Cumulative Percent Passing | ||||
|---|---|---|---|---|---|---|
| 2180.1 grams | ||||||
| 0.0 grams | 0.0 % | 100 % | ||||
| 0.0 grams | 0.0 % | 100 % | ||||
| 0.0 grams | 0.0 % | 100 % | ||||
| 27.9 grams | 0.2 % | 99 % | ||||
| 324.7 grams | 0.5 % | 86 % | ||||
| 633.9 grams | -1.1 % | 70 % | ||||
| 1148.2 grams | -0.5 % | 47 % | ||||
| 1455.2 grams | -1.0 % | 32 % | ||||
| 1664.5 grams | 0.0 % | 24 % | ||||
| 1808.3 grams | 0.3 % | 17 % | ||||
| 1926.7 grams | 0.1 % | 12 % | ||||
| 2004.0 grams | 0.2 % | 8 % | ||||
| 2051.2 grams | 0.2 % | 6.1 % | ||||
| 2062.7 grams | ||||||
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 8/10/2026 ✔