Summary for Test 2026-07-22-27-2
Test performed: AASHTO T315-24Project Information
| Project Identifiers | Project ID: 1001370 DEA: 010K9504 EFIS: 0121000034 |
|---|---|
| DIST-CO-RTE-PM | 01-DN-101-15.6/16.2 |
| Award Date | 09/22/2025 |
| Closeout Date | Not set |
| Work Description | PLACE ROADWAY SECTION, INSTALL GUARDRAIL, & EXCAVATE EXISTING ROADWAY. |
| Location Description | DEL NORTE COUNTY ABOUT 10.0 MILES SOUTH OF CRESCENT CITY FROM 3.0 MILES NORTH TO 3.6 MILES NORTH OF WILSON CREEK BRIDGE |
| QA Service Level | 1 (Verified on 07/08/2025) |
Sample Information
| Sample Taken Date | 07/22/2026 | Sample Unique Key | 27 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 07/24/2026 |
| Sample type | Production Start-Up | A brief description of the sample | 1 can of PG 61-16 |
| The quantity of what the sample constitutes | 1 can of binder | From where was the sample collected | Source |
| First name of sampler or witnessed by | Lee | Last name of sampler or witnessed by | Renick |
| Title of sampler | TET | Telephone number of sampler | |
| Laboratory sample identification | Linked DIME Sample ID | ||
| The fabricator/manufacturer/facility name | Tidewater Smith River | Transportation Laboratory (TL) Number | 025859 |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | 025859 | Structure unique identifier | |
| Structure name | Bid Item | Not set |
Material Information
| Material Type | Asphalt Binder | Performance Grade | PG 64-16 |
|---|---|---|---|
| Modified | Lot number | 1 | |
| Sublot number | 1 | Tank number | |
| Time of sample | HMA Supplier | Tidewater- Smith River | |
| Certified Asphalt Supplier | Western Emulsions - White City Emulsion Plant - White City OR | Multigrade | No |
| Multigrade Type | Asphalt Binder Mix Number | ||
| HMA Type | 1/2" HMA- 15% RAP PG 64-16 | HMA Supplier Mix ID Number | NOT LISTED ON TL 101 |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2026-07-22-27
DIME Test ID: 2026-07-22-27-2
Testing Lab: CT HQ - Sacramento Asphalt Binder Laboratory
Test Method: AASHTO T315-24: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)
Test Release Date: 2026-07-30
Test Results
Phase: Original binder
Input Type: Measured
Tester's full name: Amare Tefera
Date of test: 07/30/2026
Test Gap: 1 mm
Test Frequency: 10.0 rad/s
Strain Amplitude: 12.06 %
Stress Amplitude: 0.170 kPa
Phase Angle (δ) (for the 10 cycles): 86.5 degree
Complex Modulus (G*) (for the 10 measurements): 1.412 kPa
Test Temperature (Specimen 1): 64.0 C
Dynamic Shear, G*/sin(δ): 1.41 kPa
General comments (publicly viewable) (Max 1000 characters): OG
Test was verified on 7/30/2026 ✔