Summary for Test 2026-06-24-20-1
Test performed: ASTM A416-18Project Information
| Project Identifiers | Project ID: 995488 DEA: 051C9504 EFIS: 0513000018 |
|---|---|
| DIST-CO-RTE-PM | 05-SB-101-R36.0/R37.0 |
| Award Date | 07/09/2024 |
| Closeout Date | Not set |
| Work Description | COLD PLANE AC PVMT, RHMA, LIGHTING SYSTEMS, AND REPLACE BRIDGES. |
| Location Description | SANTA BARBARA COUNTY ABOUT 8.0 MILES WEST OF GOLETA FROM 0.6 MILE EAST OF REFUGIO ROAD UNDERCROSSING TO 0.4 MILE WEST OF REFUGIO ROAD UNDERCROSSING. |
| QA Service Level | 1 (Verified on 12/11/2023) |
Sample Information
| Sample Taken Date | 06/24/2026 | Sample Unique Key | 20 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | No | Date that the sample was received by the laboratory/organization performing the testing | 06/25/2026 |
| Sample type | Quality Assurance | A brief description of the sample | .6in Prestressing Strand |
| The quantity of what the sample constitutes | 4 | From where was the sample collected | Manufacturer |
| First name of sampler or witnessed by | mike | Last name of sampler or witnessed by | vasquez |
| Title of sampler | Telephone number of sampler | ||
| Laboratory sample identification | Linked DIME Sample ID | ||
| The fabricator/manufacturer/facility name | Sumiden Wire | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name | Bid Item | Not set |
Material Information
| Material Type | SMTL TM4 - Prestressing Strand | Comments | |
|---|---|---|---|
| Reel/Coil/Pack Number(s) | Number of Coils | ||
| Group Number | Strand Diameter | ||
| Grade | 270 | Strand Specification | ASTM A 416 |
| Heat Number(s) | S0253292, S0513426, S0513126, S0513026 | Mfg. Lot Number(s) | S381225-4, S381230-4, S381231-4, S381232-3 |
| Manufacturer(s) | Sumiden Wire |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2026-06-24-20
DIME Test ID: 2026-06-24-20-1
Testing Lab: CT HQ - Sacramento Structural Materials Testing Laboratory
Test Method: ASTM A416-18: Standard Specification for Low-Relaxation, Seven-Wire Steel Strand for Prestressed Concrete
Test Release Date: 2026-07-21
Test Results
Number of Samples: 4
Input Type: Measured
Tester's full name: Steven Paine
Date of test: 07/21/2026
UTM: NA
Temperature: 0 f
Extensometers: NA
| Num | Heat Number | Coil | Area (sqin) | Peak Load (lbf) | Load at EUL (lbf) | Chord Modulus (Msi) | Elongation (in) | Tested By |
|---|---|---|---|---|---|---|---|---|
| 1 | S0253292 | S381225-4 | 0.218 | 61950 | 58140 | 29.3 | 0000 | WSP |
| 2 | S0513426 | S381230-4 | 0.217 | 61460 | 57200 | 28.1 | 0000 | WSP |
| 3 | S0513126 | S381231-4 | 0.217 | 61700 | 57900 | 28.8 | 0000 | WSP |
| 4 | S0513026 | S381232-3 | 0.214 | 61330 | 58570 | 27.6 | 0000 | WSP |
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 7/21/2026 ✔