DIME - Test Summary

Summary for Test 2026-07-01-23-2

Test performed: AASHTO T84-14

Project Identifiers	Project ID: 1002156 DEA: 081P8304 EFIS: 0824000136
DIST-CO-RTE-PM	08-RIV-15-33.2/33.2
Award Date	06/12/2026
Closeout Date	Not set
Work Description	REHABILITATE 30" CSP CULVERTS
Location Description	IN RIVERSIDE COUNTY AT TEMESCAL VALLEY AT TEMESCAL CANYON ROAD UNDERCROSSING
QA Service Level	1 (Verified on 04/27/2026)

Sample Taken Date	07/01/2026	Sample Unique Key	23
Date that the sample was received by the laboratory/organization performing the testing	07/02/2026	Sample type	Verification
A brief description of the sample	JMF 3/4" WMA A SP, RAP 22% LAS 0.25%	The quantity of what the sample constitutes	4 Bags of Cold feed, 2 Bags of Combined RAP
From where was the sample collected	Manufacturer	First name of sampler or witnessed by	John
Last name of sampler or witnessed by	Mejia	Title of sampler
Telephone number of sampler		Laboratory sample identification	0378A-26
Linked DIME Sample ID		The fabricator/manufacturer/facility name	Vulcan materials
Transportation Laboratory (TL) Number		Inspector Lot Number from the Transportation Laboratory (TL) Form
Structure unique identifier		Structure name
Bid Item	Not set

Material Type	Aggregate	Source Identification (SMARA, name of Pit or Job Site)	91-19-0035 / 91-33-0027
The fabricator's/manufacturer's product name for the sample		The fabricator/manufacturer designation for the sample
The plant number		A detailed description of where the material sample was collected	Belt Cut at Plant
Where the material sample would have been placed if not sampled		Primary Aggregate Nominal Size	3/4 inch
The concrete mix design number	220207 SVA VLO PPG	Lot number
Sublot number		Aggregate Mix Number

DIME Sample ID: 2026-07-01-23

DIME Test ID: 2026-07-01-23-2

Testing Lab: CT D08 - Fontana Southern Regional Laboratory

Test Method: AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)

Test Release Date: 2026-09-15

Input Type: Measured

Tester's full name: FO

Date of test: 07/08/2026

Mass of saturated surface dry sample (before pycnometer) (S)	500.0 grams
Mass of the pycnometer with water and aggregate (C)	962.5 grams
Mass of the pycnometer with water (B)	649.3 grams
Mass of the oven dried sample (before pycnometer) (A)	492.6 grams
Mass of the saturated surface dry aggregate (for absorption) (S)	500.0 grams
Mass of the oven dry aggregate (for absorption) (A)	492.6 grams
Test Sample Preparation	6% Moisture
Bulk specific gravity	2.637
Bulk specific gravity (SSD Basis)	2.677
Apparent specific gravity	2.746
Absorption	1.5 %

General comments (publicly viewable) (Max 1000 characters):

Test was verified on 9/15/2026 ✔