Summary for Test 2026-07-14-5-1
Test performed: ASME B1.2-83r17Project Information
| Project Identifiers | Project ID: 1000081 DEA: 081J5404 EFIS: 0818000069 |
|---|---|
| DIST-CO-RTE-PM | 08-SBD-15-2.4 |
| Award Date | 04/02/2025 |
| Closeout Date | Not set |
| Work Description | CB, JPCP (RSC), STRUCTURAL CONCRETE AND MODIFYING LIGHTING SYSTEMS. |
| Location Description | SAN BERNARDINO COUNTY IN ONTARIO AT ROUTE 10/15 SEPARATION |
| QA Service Level | 1 (Verified on 02/06/2024) |
Sample Information
| Sample Taken Date | 07/14/2026 | Sample Unique Key | 5 |
|---|---|---|---|
| Date that the sample was received by the laboratory/organization performing the testing | 07/15/2026 | Sample type | Quality Assurance |
| A brief description of the sample | F1554 Grade 55 HDG Anchor Bolts | The quantity of what the sample constitutes | 2 of 72 |
| From where was the sample collected | Distributor | First name of sampler or witnessed by | Lorenzo |
| Last name of sampler or witnessed by | Garcia | Title of sampler | QA |
| Telephone number of sampler | Laboratory sample identification | ||
| Linked DIME Sample ID | The fabricator/manufacturer/facility name | Blue Circle | |
| Transportation Laboratory (TL) Number | Inspector Lot Number from the Transportation Laboratory (TL) Form | L115-115-26 | |
| Structure unique identifier | Structure name | ||
| Bid Item | 3928201 |
Material Information
| Material Type | SMTL TM3 - Fastener Assembly | Rocap Number(s) | N/A |
|---|---|---|---|
| Heat Number(s) | 3147142 | Nut Mfg. Lot Number(s) | None |
| Washer Mfg. Lot Number(s) | None | Bolt Specification | F1554 Gr.55 |
| Bolt Length(s) | 60" | Nut Specification | None |
| Washer Specification | None | Finish | Galvanize |
| Diameter/Size | 3" | Bolt Mfg. Lot Number | 86871147/147142A106 |
| Rocap Test Requirement(s) | None | Lubricant Requirements(s) | None |
| Washer Inner Diameter(s) | None | Bolt Mill Supplier | Not set |
| Nut Mill Supplier | Not set | Washer Mill Supplier | Not set |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2026-07-14-5
DIME Test ID: 2026-07-14-5-1
Testing Lab: CT HQ - Sacramento Structural Materials Testing Laboratory
Test Method: ASME B1.2-83r17: (Pitch Diameter) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Pitch Diameter)
Test Release Date: 2026-08-04
Test Results
Input Type: Calculated
Tester's full name: Jereme Morgan
Date of test: 07/15/2026
Sample No.: 1A
Rocap Number: no data
Heat Number(s): 3147142
Mfg. Lot Number: no data
Finish Coating: ASTM A153 - Hot Dip
Product Markings: YELLOW
Size: 3 in
Bolt Length: 60 in
Pitch Diameter: 2.8345 in
Pitch Diameter 2nd: no data
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 8/4/2026 ✔