Summary for Test 2026-06-16-30-9
Test performed: ASTM F606-21Project Information
| Project Identifiers | Project ID: 1000611 DEA: 120R32U4 EFIS: 1222000054 |
|---|---|
| DIST-CO-RTE-PM | 12-ORA-55-0.2/R17.8 |
| Award Date | 02/07/2025 |
| Closeout Date | Not set |
| Work Description | COLD PLANE, PLACE RHMA, REPLACE CB, SIGNS AND MODIFY LIGHTING SYSTEM. |
| Location Description | ORANGE COUNTY FROM 0.1 MILE SOUTH OF ROUTE 55/1 SEPARATION IN NEWPORT BEACH TO ROUTE 55/91 SEPARATION IN ANAHEIM |
| QA Service Level | 1 (Verified on 09/30/2024) |
Sample Information
| Sample Taken Date | 06/16/2026 | Sample Unique Key | 30 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | No | Date that the sample was received by the laboratory/organization performing the testing | 06/29/2026 |
| Sample type | Stock | A brief description of the sample | 3/4"x 2.0" A325 Bolts |
| The quantity of what the sample constitutes | 4000 | From where was the sample collected | Fabricator |
| First name of sampler or witnessed by | Kevin | Last name of sampler or witnessed by | Carpenter |
| Title of sampler | Quality Assurance Inspector | Telephone number of sampler | 415-608-1742 |
| Laboratory sample identification | Linked DIME Sample ID | ||
| The fabricator/manufacturer/facility name | UIS | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | B24-150-26 | Structure unique identifier | |
| Structure name | Bid Item | Not set |
Material Information
| Material Type | SMTL TM3 - Fastener Assembly | Rocap Number(s) | N/A |
|---|---|---|---|
| Heat Number(s) | 10942330 | Nut Mfg. Lot Number(s) | xxx |
| Washer Mfg. Lot Number(s) | xxx | Bolt Specification | A325 |
| Bolt Length(s) | 2.0" | Nut Specification | xxx |
| Washer Specification | xxx | Finish | MG |
| Diameter/Size | 3/4" | Bolt Mfg. Lot Number | BM1485 |
| Rocap Test Requirement(s) | xxx | Lubricant Requirements(s) | xxx |
| Washer Inner Diameter(s) | xxx |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2026-06-16-30
DIME Test ID: 2026-06-16-30-9
Testing Lab: CT HQ - Sacramento Structural Materials Testing Laboratory
Test Method: ASTM F606-21: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)
Test Release Date: 2026-07-17
Test Results
Number of Bolt Samples: 3
Input Type: Measured
Tester's full name: Kevin De Souza
Date of test: 07/09/2026
UTM: NA
Temperature: 0 f
| Num | Sample | Bolt Mfg. Lot Number | Size (in) | Peak Load (lbf) | Peak Load (kN) | Wedge Angle (deg) | Comments | Tested By |
|---|---|---|---|---|---|---|---|---|
| 1 | 1A | BM1485 | 0.75 | 46320 | 0 | 0 | Tensile | Kleinfelder |
| 2 | 2A | BM1485 | 0.75 | 46190 | 0 | 0 | Tensile | Kleinfelder |
| 3 | 3A | BM1485 | 0.75 | 49280 | 0 | 0 | Tensile | Kleinfelder |
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 7/17/2026 ✔