Summary for Test 2026-07-01-5-1
Test performed: AASHTO T209-25Project Information
| Project Identifiers | Project ID: 1001564 DEA: 030J4104 EFIS: 0319000281 |
|---|---|
| DIST-CO-RTE-PM | 03-PLA-80-33.0/44.9 |
| Award Date | 07/01/2025 |
| Closeout Date | Not set |
| Work Description | COLD PLANE AC PVMT, HMA, CLASS 2 AB, RDWY EXC, MGS, & RCP. |
| Location Description | PLACER COUNTY IN AND NEAR COLFAX FROM 0.1 MILE WEST OF ROUTE 174/80 SEPARATION TO 0.1 MILE EAST OF ALTA ROAD UNDERCROSSING |
| QA Service Level | 1 (Verified on 09/17/2025) |
Sample Information
| Sample Taken Date | 07/01/2026 | Sample Unique Key | 5 |
|---|---|---|---|
| Date that the sample was received by the laboratory/organization performing the testing | 07/01/2026 | Sample type | Quality Assurance |
| A brief description of the sample | 3/4 HMA-A SP R25 PG 58-22 | The quantity of what the sample constitutes | 2 Boxes HMA-A |
| From where was the sample collected | Supplier | First name of sampler or witnessed by | Dustan |
| Last name of sampler or witnessed by | Kliethermes | Title of sampler | Materials Tester |
| Telephone number of sampler | Laboratory sample identification | ||
| Linked DIME Sample ID | The fabricator/manufacturer/facility name | Teichert Hallwood | |
| Transportation Laboratory (TL) Number | Inspector Lot Number from the Transportation Laboratory (TL) Form | ||
| Structure unique identifier | Structure name | ||
| Bid Item | Not set |
Material Information
| Material Type | Hot Mix Asphalt | HMA Type | Type A HMA |
|---|---|---|---|
| HMA Grading | 3/4 inch | Lot number | 1 |
| Sublot number | 17 | HMA Mix Number | 30940132416P |
| Binder content (%) | 4.5 | Virgin binder PG | |
| Design binder PG | PG 58-22 | Binder Supplier | PNW |
| RAP content (%) | 25 | WMA Additives | No |
| Antistrip type |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2026-07-01-5
DIME Test ID: 2026-07-01-5-1
Testing Lab: CT D03 - Olivehurst Northern Regional Laboratory
Test Method: AASHTO T209-25: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)
Test Release Date: 2026-07-02
Test Results
Number of Samples: 1
What is the unit of measurement for theoretical density?: SI Units
Mass Determination: Air
Input Type: Measured
Tester's full name: KHUE YANG
Date of test: 07/02/2026
Method Performed: Mechanical Agitation - Method A
Mass of container filled with water 1: 7402.5 grams
Mass of oven-dry sample in air for Sample 1: 2633.6 grams
Mass of container filled with the sample and water for Sample 1: 9021.3 grams
Temperature of Water: 25 °F
Specific Gravity for Sample 1: 2.595
Theoretical maximum density at 25°C (77°F): 2587 kg/m^3
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 7/2/2026 ✔