Summary for Test 2018-04-10-1-1
Test performed: ASTM F606-14Project Information
| Project Identifiers | Project ID: 210828 DEA: 07290704 EFIS: 0712000076 |
|---|---|
| DIST-CO-RTE-PM | 07-LA-47-0.9/2.0 |
| Award Date | 04/06/2016 |
| Closeout Date | 06/25/2019 |
| Work Description | RESTORE BRIDGE SEISMIC. |
| Location Description | Not set |
| QA Service Level | 1 (Verified on 06/03/2016) |
Sample Information
| Sample Taken Date | 04/10/2018 | Sample Unique Key | 1 |
|---|---|---|---|
| Date that the sample was received by the laboratory/organization performing the testing | 04/18/2018 | Sample type | Quality Assurance |
| A brief description of the sample | A449 Anchor Rods | The quantity of what the sample constitutes | 2 |
| From where was the sample collected | Fabricator | First name of sampler or witnessed by | Ryan |
| Last name of sampler or witnessed by | Cummings | Title of sampler | QA Inspector |
| Telephone number of sampler | 916-718-7759 | Laboratory sample identification | |
| Linked DIME Sample ID | The fabricator/manufacturer/facility name | CK Johnson INdustries | |
| Transportation Laboratory (TL) Number | Inspector Lot Number from the Transportation Laboratory (TL) Form | S29-037-18 | |
| Structure unique identifier | Not set | Structure name | Not set |
| Bid Item | Not set |
Material Information
| Material Type | SMTL TM3 - Fastener Assembly | Rocap Number(s) | |
|---|---|---|---|
| Heat Number(s) | 6214434108 | Nut Mfg. Lot Number(s) | 26729 |
| Washer Mfg. Lot Number(s) | 0817-609 | Bolt Specification | A449 |
| Bolt Length(s) | 20-1/4" , 18-3/4" | Nut Specification | A563 |
| Washer Specification | F436 | Finish | GALV. |
| Diameter/Size | 1-1/4 | Bolt Mfg. Lot Number | 166399 |
| Rocap Test Requirement(s) | Lubricant Requirements(s) | Blue dye | |
| Washer Inner Diameter(s) | Bolt Mill Supplier | Not set | |
| Nut Mill Supplier | Not set | Washer Mill Supplier | Not set |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2018-04-10-1
DIME Test ID: 2018-04-10-1-1
Testing Lab: CT HQ - Sacramento Structural Materials Testing Laboratory
Test Method: ASTM F606-14: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Hex Cap Screws)
Test Release Date: 2018-04-30
Test Results
Number of Samples: 1
Input Type: Measured
Tester's full name: Fred
Date of test: 04/18/2018
UTM: 400KIP
Temperature: 72
| Num | Sample | Size | Area (in^2) | Peak Load (lbf) | Peak Load (kN) | Tensile Strength (psi) | Stress at Offset (psi) | Load at Offset (lbf) | Comments |
|---|---|---|---|---|---|---|---|---|---|
| 1 | 1A | A449 1.250 x 18.75\" Stud w / Nut | 0.969 | 120745 | 537 | 124608 | 122315 | 118523 | A449 Stud & Nut |
General comments (publicly viewable) (Max 1000 characters): A449 Stud & Nut
Test Graph
Source: Partner Data Point FileTest was verified on 4/23/2018 ✔