Summary for Test 2026-05-29-57-2
Test performed: AASHTO T315-24Project Information
| Project Identifiers | Project ID: 215734 DEA: 024H0104 EFIS: 0218000068 |
|---|---|
| DIST-CO-RTE-PM | 02-PLU-70-78.3/90.3 |
| Award Date | 01/29/2025 |
| Closeout Date | Not set |
| Work Description | REPLACE AC SURFACING, PLACE HMA AND THERMOPLASTIC TRAFFIC STRIPING. |
| Location Description | PLUMAS COUNTY NEAR PORTOLA FROM 0.4 MILE WEST OF BIG GRIZZLY CREEK BRIDGE TO 0.8 MILE WEST OF SUMMIT SCHOOL DRIVE |
| QA Service Level | 1 (Verified on 07/08/2021) |
Sample Information
| Sample Taken Date | 05/29/2026 | Sample Unique Key | 57 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 06/16/2026 |
| Sample type | Acceptance | A brief description of the sample | 2 cans of binder |
| The quantity of what the sample constitutes | 2, 1 quart cans of binder | From where was the sample collected | Source |
| First name of sampler or witnessed by | E | Last name of sampler or witnessed by | Chavez |
| Title of sampler | Materials Tester | Telephone number of sampler | |
| Laboratory sample identification | 080217 | Linked DIME Sample ID | |
| The fabricator/manufacturer/facility name | Hat Creek Construction, Ward Lake Plant, Litchfield, CA | Transportation Laboratory (TL) Number | 036633 |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | 036633 | Structure unique identifier | |
| Structure name | Bid Item | Not set |
Material Information
| Material Type | Asphalt Binder | Performance Grade | PG 58-34 |
|---|---|---|---|
| Modified | No | Lot number | |
| Sublot number | Tank number | ||
| Time of sample | HMA Supplier | Hat Creek- Yard Lake | |
| Certified Asphalt Supplier | Western Emulsions - White City Emulsion Plant - White City OR | Multigrade | No |
| Multigrade Type | Asphalt Binder Mix Number | ||
| HMA Type | Not set | HMA Supplier Mix ID Number | Not set |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2026-05-29-57
DIME Test ID: 2026-05-29-57-2
Testing Lab: CT HQ - Sacramento Asphalt Binder Laboratory
Test Method: AASHTO T315-24: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)
Test Release Date: 2026-06-30
Test Results
Phase: RTFO residue two specimens
Input Type: Measured
Tester's full name: Erik Svensson
Date of test: 06/30/2026
Test Plate Diameter: 8 mm
Test Gap: 1 mm
Test Frequency: 10.0 rad/s
Strain Amplitude: 10.05 %
Stress Amplitude: 0.420 kPa
Phase Angle (δ) (for the 10 cycles): 64.4 degree
Complex Modulus (G*) (for the 10 measurements): 4.178 kPa
Test Temperature (Specimen 1): 58.0 C
Dynamic Shear, G*/sin(δ): 4.63 kPa
Stress Amplitude 2: 0.387 kPa
Phase Angle 2 (δ) (for the 10 cycles): 64.7 degree
Complex Modulus 2 (G*) (for the 10 measurements) : 3.847 kPa
Test Temperature (Specimen 2): 58.0 C
Dynamic Shear 2, G*/sin(δ): 4.26 kPa
Delta at 2.2 kpa: 66.4 degree
General comments (publicly viewable) (Max 1000 characters): RTFO
Test was verified on 6/30/2026 ✔