DIME - Test Summary

Summary for Test 2026-05-21-70-2

Test performed: AASHTO T27-14

Sample Taken Date	05/21/2026	Sample Unique Key	70
Date that the sample was received by the laboratory/organization performing the testing	05/21/2026	Sample type	Verification
A brief description of the sample	2 bags of Untreated Plant Sand Sized Virgin Aggregate	The quantity of what the sample constitutes	JMF Verification/Annual Soundness Testing
From where was the sample collected	Manufacturer	First name of sampler or witnessed by	Cindy
Last name of sampler or witnessed by	Bryant	Title of sampler
Telephone number of sampler		Laboratory sample identification	D80207A
Linked DIME Sample ID		The fabricator/manufacturer/facility name	J.F. Shea Construction — Fawndale Rock and Asphalt (Redding, CA)
Transportation Laboratory (TL) Number	854569A	Inspector Lot Number from the Transportation Laboratory (TL) Form
Structure unique identifier		Structure name
Bid Item	Not set

Material Type	Aggregate	Source Identification (SMARA, name of Pit or Job Site)	91-45-0017::Fawndale Rock Quarry (Redding, CA)
The fabricator's/manufacturer's product name for the sample		The fabricator/manufacturer designation for the sample
The plant number		A detailed description of where the material sample was collected	Untreated Sized Virgin Aggregate Stockpile
Where the material sample would have been placed if not sampled		Primary Aggregate Nominal Size	fine
The concrete mix design number		Lot number
Sublot number		Aggregate Mix Number

DIME Sample ID: 2026-05-21-70

DIME Test ID: 2026-05-21-70-2

Testing Lab: CT D02 - Redding Northern Regional Laboratory

Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)

Test Release Date: 2026-06-23

What type of gradation is being tested?: HMA Gradation

Individual or cumulative mass retained on each sieve?: Cumulative Mass Retained

Does this test use 1/4 sieve? (question for HMA Gradation Type): No

Has the fine aggregate sample been reduced?: No

Input Type: Measured

Tester's full name: Dacota Mei

Date of test: 05/27/2026

	Cumulative Mass Retained	Cumulative Percent Passing
Total mass of material in the sample	620.0 grams
2 in. sieve	0.0 grams	100 %
1 1/2 in. sieve	0.0 grams	100 %
1 in. sieve	0.0 grams	100 %
3/4 in. sieve	0.0 grams	100 %
1/2 in. sieve	0.0 grams	100 %
3/8 in. sieve	0.0 grams	100 %
#4 sieve	5.5 grams	99 %
#8 sieve	183.0 grams	70 %
#16 sieve	348.2 grams	44 %
#30 sieve	438.8 grams	29 %
#50 sieve	495.3 grams	20 %
#100 sieve	526.7 grams	15 %
#200 sieve	545.3 grams	12 %
Cumulative mass retained on the pan	546.6 grams

General comments (publicly viewable) (Max 1000 characters):

Test was verified on 6/23/2026 ✔