DIME - Test Summary

Summary for Test 2018-03-07-7-1

Test performed: CTM 214-August 2010

Project Identifiers	Project ID: 212869 DEA: 060V1804 EFIS: 0617000169
DIST-CO-RTE-PM	06-KER,TUL-99,190-49.3/57.6;14.6/20.9
Award Date	01/16/2018
Closeout Date	10/23/2020
Work Description	COLD PLANE, REPAIR FAILED AC PVMT AND RESURFACE WITH RHMA-O(BWC).
Location Description	KERN AND TULARE COUNTIES IN AND NEAR MCFARLAND ON ROUTE 99 FROM SHERWOOD AVENUE OVERCROSSING TO TULARE COUNTY LINE AND IN AND NEAR PORTERVILLE ON ROUTE 190 FROM 0.3 MILE WEST OF PROSPECT STREET TO 0.2 MILE WEST OF ROAD 284
QA Service Level	1 (Verified on 12/19/2018)

Sample Taken Date	03/07/2018	Sample Unique Key	7
Date that the sample was received by the laboratory/organization performing the testing	03/16/2018	Sample type	Annual Source Testing
A brief description of the sample	1 x 4 PCC Aggregate	The quantity of what the sample constitutes	1 bag
From where was the sample collected	Source	First name of sampler or witnessed by	Mike
Last name of sampler or witnessed by	Ruiz	Title of sampler	Unknown
Telephone number of sampler	Unknown	Laboratory sample identification	18-0024
Linked DIME Sample ID	Unknown	The fabricator/manufacturer/facility name	Porterville Rock
Transportation Laboratory (TL) Number	C980224A	Inspector Lot Number from the Transportation Laboratory (TL) Form	Unknown
Structure unique identifier	Not set	Structure name	Not set
Bid Item	Not set

Material Type	Aggregate	Source Identification (SMARA, name of Pit or Job Site)	91-54-0038::WILCOX MINE
The fabricator's/manufacturer's product name for the sample	Unknown	The fabricator/manufacturer designation for the sample	Unknown
The plant number	Unknown	A detailed description of where the material sample was collected	Unknown
Where the material sample would have been placed if not sampled	Unknown	Primary Aggregate Nominal Size	1 inch
The concrete mix design number	Unknown	Lot number	Not set
Sublot number	Not set	Aggregate Mix Number	Not set
HMA Pay	No

DIME Sample ID: 2018-03-07-7

DIME Test ID: 2018-03-07-7-1

Testing Lab: CT HQ - Sacramento Aggregate Testing Laboratory

Test Method: CTM 214-August 2010: Method of Test for Soundness of Aggregates by Use of Sodium Sulfate

Test Release Date: 2018-04-12

What size aggregate is being tested?: Coarse Aggregate

Input Type: Calculated

Tester's full name: Phillip Montes

Date of test: 04/12/2018

Percentage Loss of material retained on 2 x 1 ½ in. sieve: no data

Percentage Loss of material retained on 1 ½ x 1 in. sieve: no data

Percentage Loss of material retained on 1 x ¾ in. sieve: no data

Percentage Loss of material retained on ¾ x ½ in. sieve: no data

Percentage Loss of material retained on ½ x ⅜ in. sieve: no data

Percentage Loss of material retained on ⅜ in. x #4 sieve: no data

Percentage Loss of material retained on 2 in. through 1 1/2 in. sieve: no data

Percentage Loss of material retained on 1 in. through 3/4 in. sieve: no data

Percentage Loss of material retained on 3/4 in. through #4 sieve: no data

Weighted Average Percent Loss of Coarse Aggregate: 5.6 %

Batch Soundness Loss of Coarse Aggregate (2 1/2 in maximum): no data

Batch Soundness Loss of Coarse Aggregate (1 1/2 in maximum): no data

General comments (publicly viewable) (Max 1000 characters):

Test was verified on 4/12/2018 ✔