Summary for Test 2018-04-02-3-1

Test performed: AASHTO T27-14

Project Information

Project IdentifiersProject ID: 212886
DEA: 023H1204
DIST-CO-RTE-PM02-TEH-5-R0.0/R22.4
Award Date01/03/2018
Closeout Date02/06/2019
Work DescriptionCOLD PLANE RAC-O, PLACE RHMA-O, REPLACE AC SURFACING, MBGR
Location DescriptionTEHAMA COUNTY AT AND NEAR CORNING FROM GLENN COUNTY LINE TO 0.3 MILE NORTH OF BRANCH COYOTE CREEK BRIDGE
QA Service Level1 (Verified on 01/08/2019)

Sample Information

Sample Taken Date04/02/2018 Sample Unique Key3
Date that the sample was received by the laboratory/organization performing the testing04/03/2018 Sample typeDepartment Acceptance
A brief description of the sampleTreated Virgin Aggregate The quantity of what the sample constitutesProduction Start Up Evaluation
From where was the sample collectedManufacturer First name of sampler or witnessed byMichael
Last name of sampler or witnessed byAllegretto Title of samplerLab Tech
Telephone number of samplerUnknown Laboratory sample identification17-07-P07, D77311A
Linked DIME Sample IDUnknown The fabricator/manufacturer/facility nameTullis Inc - Northstate Asphalt - Redding, CA
Transportation Laboratory (TL) Number852090 Inspector Lot Number from the Transportation Laboratory (TL) FormUnknown
Structure unique identifierNot set Structure nameNot set
Bid ItemNot set

Material Information

Material TypeAggregate Source Identification (SMARA, name of Pit or Job Site)91-45-0057
The fabricator's/manufacturer's product name for the sampleUnknown The fabricator/manufacturer designation for the sampleUnknown
The plant numberUnknown A detailed description of where the material sample was collectedCold Feed
Where the material sample would have been placed if not sampledDigout HMA Primary Aggregate Nominal Size3/4 inch
The concrete mix design numberUnknown Lot numberNot set
Sublot numberNot set Aggregate Mix NumberNot set
HMA PayNo

Test Details

DIME Sample ID: 2018-04-02-3
DIME Test ID: 2018-04-02-3-1
Testing Lab: CT D02 - Redding Northern Regional Laboratory
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Test Release Date: 2018-04-06

Test Results


What type of gradation is being tested?: HMA Gradation
Individual or cumulative mass retained on each sieve?: Cumulative Mass Retained
Does this test use 1/4 sieve? (question for HMA Gradation Type): Yes
Has the fine aggregate sample been reduced?: No
Input Type: Measured
Tester's full name: Darrell Valasek
Date of test: 04/03/2018
Cumulative Mass RetainedCumulative Percent Passing
5120.6 grams
grams %
0.0 grams100 %
0.0 grams100 %
0.0 grams100 %
556.0 grams89 %
1813.0 grams65 %
2804 grams45 %
3097.0 grams40 %
174.6 grams26 %
285.0 grams17 %
351.1 grams12 %
393.7 grams9 %
422.3 grams7 %
441.5 grams5 %
grams
General comments (publicly viewable) (Max 1000 characters): Gradation of Cold Feed

Test was verified on 4/6/2018 ✔