Summary for Test 2026-05-18-40-1
Test performed: ASTM A370-20Project Information
| Project Identifiers | Project ID: 1000403 DEA: 120K91U4 EFIS: 1222000031 |
|---|---|
| DIST-CO-RTE-PM | 12-ORA-91-R9.2/R11.4 |
| Award Date | 01/03/2025 |
| Closeout Date | Not set |
| Work Description | CONST BRIDGES, RW, SW, PAVEMENT, DRAINAGE AND ELECTRICAL SYSTEMS. |
| Location Description | ORANGE COUNTY IN ANAHEIM FROM 0.9 MILE WEST TO 1.3 MILES EAST OF LAKEVIEW AVENUE OVERCROSSING |
| QA Service Level | 1 (Verified on 08/19/2024) |
Sample Information
| Sample Taken Date | 05/18/2026 | Sample Unique Key | 40 |
|---|---|---|---|
| Date that the sample was received by the laboratory/organization performing the testing | 05/22/2026 | Sample type | Quality Assurance |
| A brief description of the sample | A536 Ductile Iron Casting | The quantity of what the sample constitutes | 327 |
| From where was the sample collected | Manufacturer | First name of sampler or witnessed by | Keith |
| Last name of sampler or witnessed by | King | Title of sampler | |
| Telephone number of sampler | Laboratory sample identification | ||
| Linked DIME Sample ID | The fabricator/manufacturer/facility name | Farrar Corporation | |
| Transportation Laboratory (TL) Number | Inspector Lot Number from the Transportation Laboratory (TL) Form | ||
| Structure unique identifier | Structure name | ||
| Bid Item | Not set |
Material Information
| Material Type | SMTL TM6 - Ductile Iron Cast Samples | Heat Number (s) | C266 E164 |
|---|---|---|---|
| Part Number (s) | 6827172 | Material Specification | A536 |
| Grades | 80-55-06 | Metal Foundry Manufacturer (Mill) | Farrar Corporation |
| Prestressing Manufacturer | DSI Long Beach |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2026-05-18-40
DIME Test ID: 2026-05-18-40-1
Testing Lab: CT HQ - Sacramento Structural Materials Testing Laboratory
Test Method: ASTM A370-20: Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Tensile - Round Sample)
Test Release Date: 2026-06-10
Test Results
Number of Samples: 4
Input Type: Measured
Tester's full name: Steven Paine
Date of test: 06/10/2026
UTM: NA
Temperature: 0 f
| Num | Sample | Heat Number | Diameter (in) | Area (sqin) | Stress at Offset (psi) | Tensile Strength (psi) | Elongation in 4 x d (%) | Tested By |
|---|---|---|---|---|---|---|---|---|
| 1 | 1 | C266 | 0.505 | 0.200 | 57229 | 109155 | 7 | Kleinfelder |
| 2 | 2 | C266 | 0.504 | 0.199 | 57255 | 107279 | 6 | Kleinfelder |
| 3 | 3 | E164 | 0.503 | 0.199 | 57301 | 101684 | 6 | Kleinfelder |
| 4 | 4 | E164 | 0.503 | 0.199 | 57438 | 102431 | 7 | Kleinfelder |
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 6/10/2026 ✔