Summary for Test 2024-11-07-83-8
Test performed: CTM 389-19Project Information
| Project Identifiers | Project ID: 66665 DEA: BMD EFIS: BMD |
|---|---|
| DIST-CO-RTE-PM | 59--- |
| Award Date | Not set |
| Closeout Date | Not set |
| Work Description | Special project for submitting Balanced Mix Design (BMD) data for hot mix asphalt. UCPRC is collecting BMD data from the test track built for accelerated pavement testing |
| Location Description | Not set |
| QA Service Level | NOT VERIFIED |
Sample Information
| Sample Taken Date | 11/07/2024 | Sample Unique Key | 83 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 11/08/2024 |
| Sample type | Informational | A brief description of the sample | BMD TT2- 0.75 SP +1.25% AC Surface 25% RAP 58-22 |
| The quantity of what the sample constitutes | 48 Boxes | From where was the sample collected | Source |
| First name of sampler or witnessed by | James | Last name of sampler or witnessed by | Brewster |
| Title of sampler | MREA | Telephone number of sampler | 9169064487 |
| Laboratory sample identification | 025-003 | Linked DIME Sample ID | |
| The fabricator/manufacturer/facility name | George Reed - Clements Plant | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name | Bid Item | Not set |
Material Information
| Material Type | Hot Mix Asphalt | HMA Type | Type A HMA |
|---|---|---|---|
| HMA Grading | 3/4 inch | Lot number | 0 |
| Sublot number | 0 | HMA Mix Number | 025003 |
| Binder content (%) | 5.8 | Virgin binder PG | PG 64-16 |
| Design binder PG | PG 58-22 | Binder Supplier | Valero Benicia |
| RAP content (%) | 25 | WMA Additives | No |
| Antistrip type | No |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2024-11-07-83
DIME Test ID: 2024-11-07-83-8
Testing Lab: CT HQ - Sacramento Hot Mix Asphalt Laboratory
Test Method: CTM 389-19: Method of Test for Hamburg Wheel-Track Testing of Compacted Hot Mix Asphalt
Test Release Date: 2026-06-16
Test Results
Specified number of passes at 12.7 mm: 20000
Specimen Preparation Method: PMLC
Input Type: Measured
Tester's full name: James Brewster
Date of test: 03/24/2026
Test Temperature: 122 F
Compaction Method: SGC Cylindrical Specimen
Air Void Content for specimen A-1: 7.3 %
Air Void Content for specimen A-2: 6.9 %
Air Void Content for specimen B-1: 7.2 %
Air Void Content for specimen B-2: 7.1 %
Stripping Inflection Point (Wheel A): no data
Stripping Inflection Point (Wheel B): no data
Maximum impression at 5000 passes (left wheel): 4.45 mm
Maximum impression at 5000 passes (right wheel): 3.44 mm
Average impression at 5000 passes (left/right avg): 3.95 mm
Maximum impression at 10000 passes (left wheel): 5.24 mm
Maximum impression at 10000 passes (right wheel): 4.19 mm
Average impression at 10000 passes (left/right avg): 4.72 mm
Maximum impression at 15000 passes (left wheel): 5.74 mm
Maximum impression at 15000 passes (right wheel): 4.67 mm
Average impression at 15000 passes (left/right avg): 5.21 mm
Maximum impression at 20000 passes (left wheel): 6.08 mm
Maximum impression at 20000 passes (right wheel): 5.14 mm
Average impression at 20000 passes (left/right avg): 5.61 mm
Maximum impression at 25000 passes (left wheel): no data mm
Maximum impression at 25000 passes (right wheel): no data mm
Average impression at 25000 passes (left/right avg): no data mm
Raw Data: csv
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 6/16/2026 ✔