Summary for Test 2026-05-27-15-3
Test performed: ASME B1.2-83r17Project Information
| Project Identifiers | Project ID: 1001197 DEA: 07319604 EFIS: 0716000025 |
|---|---|
| DIST-CO-RTE-PM | 07-VEN-1,101-21.3/21.9,R34.9/R36.1 |
| Award Date | 09/16/2025 |
| Closeout Date | Not set |
| Work Description | REMOVE AND CONSTRUCT BRIDGE. |
| Location Description | VENTURA COUNTY ON ROUTE 1 FROM 1.8 MILES NORTH OF ROUTE 1/33 SEPARATION TO 2.0 MILES SOUTH OF A LEASE CANYON ROAD AND ON ROUTE 101 FROM 0.4 MILE NORTH OF DULAH ROAD UNDERCROSSING TO SAN MIGUELITO ROAD UNDERCROSSING |
| QA Service Level | 1 (Verified on 07/01/2025) |
Sample Information
| Sample Taken Date | 05/27/2026 | Sample Unique Key | 15 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | No | Date that the sample was received by the laboratory/organization performing the testing | 05/28/2026 |
| Sample type | Quality Assurance | A brief description of the sample | A325 Bolt |
| The quantity of what the sample constitutes | 810 | From where was the sample collected | Manufacturer |
| First name of sampler or witnessed by | Joe | Last name of sampler or witnessed by | Barron |
| Title of sampler | Telephone number of sampler | ||
| Laboratory sample identification | Linked DIME Sample ID | ||
| The fabricator/manufacturer/facility name | AFC Industries | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name | Bid Item | Not set |
Material Information
| Material Type | SMTL TM3 - Fastener Assembly | Rocap Number(s) | NA |
|---|---|---|---|
| Heat Number(s) | 10923590 | Nut Mfg. Lot Number(s) | NA |
| Washer Mfg. Lot Number(s) | NA | Bolt Specification | A325 |
| Bolt Length(s) | 3 | Nut Specification | NA |
| Washer Specification | NA | Finish | HDG |
| Diameter/Size | 1-1/4 | Bolt Mfg. Lot Number | E424S1 |
| Rocap Test Requirement(s) | NA | Lubricant Requirements(s) | NA |
| Washer Inner Diameter(s) | NA |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2026-05-27-15
DIME Test ID: 2026-05-27-15-3
Testing Lab: CT HQ - Sacramento Structural Materials Testing Laboratory
Test Method: ASME B1.2-83r17: (Pitch Diameter) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Pitch Diameter)
Test Release Date: 2026-06-02
Test Results
Input Type: Calculated
Tester's full name: Andrew Auvinen
Date of test: 05/28/2026
Sample No.: 1C
Rocap Number: no data
Heat Number(s): no data
Mfg. Lot Number: E424S1
Finish Coating: ASTM F2329 - Hot Dip
Product Markings: no data
Size: 1.25 in
Bolt Length: 3 in
Pitch Diameter: 1.158 in
Pitch Diameter 2nd: no data
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 6/2/2026 ✔