Summary for Test 2018-02-27-14-2
Test performed: AASHTO T30-15Project Information
| Project Identifiers | Project ID: 212679 DEA: 023E7204 EFIS: 0200020154 |
|---|---|
| DIST-CO-RTE-PM | 02-TEH-36-42.1/46.0 |
| Award Date | 12/18/2017 |
| Closeout Date | 08/07/2019 |
| Work Description | COLD PLANING, PAVING, MINOR CONCRETE, ELECTRICAL AND STRIPING WORK. |
| Location Description | TEHAMA COUNTY IN AND NEAR RED BLUFF FROM EAST SAND SLOUGH BRIDGE TO 0.6 MILE EAST OF STICE ROAD |
| QA Service Level | 1 (Verified on 05/24/2018) |
Sample Information
| Sample Taken Date | 02/27/2018 | Sample Unique Key | 14 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 02/27/2018 |
| Sample type | Verification | A brief description of the sample | Combined RAP |
| The quantity of what the sample constitutes | JMF | From where was the sample collected | Manufacturer |
| First name of sampler or witnessed by | Cheryl | Last name of sampler or witnessed by | Abraham |
| Title of sampler | Unknown | Telephone number of sampler | Unknown |
| Laboratory sample identification | D77291B | Linked DIME Sample ID | Unknown |
| The fabricator/manufacturer/facility name | Tullis, Inc - Northstate Asphalt - Redding, CA | Transportation Laboratory (TL) Number | 852086 |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Unknown | Structure unique identifier | Not set |
| Structure name | Not set | Bid Item | Not set |
Material Information
| Material Type | Reclaimed Asphalt Pavement | RAP Source | Northstate Asphalt |
|---|---|---|---|
| Aggregate Size | 1/2-inch | Aggregate Source | Unknown |
| RAP Stockpile | Static | Stockpile Size (tons) | Unknown |
| Reclaimed Asphalt Pavement Mix Number | Not set | HMA Pay | No |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2018-02-27-14
DIME Test ID: 2018-02-27-14-2
Testing Lab: CT D02 - Redding Northern Regional Laboratory
Test Method: AASHTO T30-15: Standard Method of Test for Mechanical Analysis of Extracted Aggregate (Mechanical Analysis)
Test Release Date: 2018-03-27
Test Results
Input Type: Measured
Tester's full name: Sweeny/Valasek
Date of test: 03/02/2018
Total mass of material in the sample: 1495.6 grams
Cumulative mass retained on the 2 in. sieve: no data
Cumulative mass retained on the 1 1/2 in. sieve: 0.0 grams
Cumulative mass retained on the 1 in. sieve: 0.0 grams
Cumulative mass retained on the 3/4 in. sieve: 0.0 grams
Cumulative mass retained on the 1/2 in. sieve: 61.0 grams
Cumulative mass retained on the 3/8 in. sieve: 241.0 grams
Cumulative mass retained on the 1/4 in. sieve: 519.6 grams
Cumulative mass retained on the #4 sieve: 656.5 grams
Cumulative mass retained on the #8 sieve: 893.6 grams
Cumulative mass retained on the #16 sieve: 1059.3 grams
Cumulative mass retained on the #30 sieve: 1175.8 grams
Cumulative mass retained on the #50 sieve: 1267.3 grams
Cumulative mass retained on the #100 sieve: 1328.9 grams
Cumulative mass retained on the #200 sieve: 1368.0 grams
Cumulative percent passing the 2 in. sieve: no data
Cumulative percent passing the 1 1/2 in. sieve: 100 %
Cumulative percent passing the 1 in. sieve: 100 %
Cumulative percent passing the 3/4 in. sieve: 100 %
Cumulative percent passing the 1/2 in. sieve: 96 %
Cumulative percent passing the 3/8 in. sieve: 84 %
Cumulative percent passing the 1/4 in. sieve: 65 %
Cumulative percent passing the #4 sieve: 56 %
Cumulative percent passing the #8 sieve: 40 %
Cumulative percent passing the #16 sieve: 29 %
Cumulative percent passing the #30 sieve: 21 %
Cumulative percent passing the #50 sieve: 15 %
Cumulative percent passing the #100 sieve: 11 %
Cumulative percent passing the #200 sieve: 9 %
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 3/27/2018 ✔