Summary for Test 2026-05-17-4-1
Test performed: AASHTO T30-25Project Information
| Project Identifiers | Project ID: 995236 DEA: 060U2904 EFIS: 0616000001 |
|---|---|
| DIST-CO-RTE-PM | 06-KER-184-1.1/8.3 |
| Award Date | 08/14/2025 |
| Closeout Date | Not set |
| Work Description | COLD PLANE & OVERLAY WITH HMA/RHMA, CONSTRUCT SIDEWALKS & CURB RAMPS. |
| Location Description | KERN COUNTY NEAR BAKERSFIELD FROM WHARTON AVENUE TO EDISON HIGHWAY |
| QA Service Level | 1 (Verified on 12/18/2024) |
Sample Information
| Sample Taken Date | 05/17/2026 | Sample Unique Key | 4 |
|---|---|---|---|
| Date that the sample was received by the laboratory/organization performing the testing | 05/18/2026 | Sample type | Acceptance |
| A brief description of the sample | 3/4" aggregate and RAP | The quantity of what the sample constitutes | L1SL19 2 bags cold feeds and 1 bags of virgin aggregate |
| From where was the sample collected | Job Site | First name of sampler or witnessed by | Alex |
| Last name of sampler or witnessed by | Escobar | Title of sampler | |
| Telephone number of sampler | Laboratory sample identification | ||
| Linked DIME Sample ID | The fabricator/manufacturer/facility name | Griffith Edmonston-Lebec | |
| Transportation Laboratory (TL) Number | Inspector Lot Number from the Transportation Laboratory (TL) Form | ||
| Structure unique identifier | Structure name | ||
| Bid Item | 3936550 |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | SMARA 91-15-0068 |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
| The plant number | A detailed description of where the material sample was collected | HMA Plant Cold Feed | |
| Where the material sample would have been placed if not sampled | Primary Aggregate Nominal Size | 3/4 inch | |
| The concrete mix design number | Lot number | 1 | |
| Sublot number | 19 | Aggregate Mix Number |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2026-05-17-4
DIME Test ID: 2026-05-17-4-1
Testing Lab: CT D06 - Bakersfield Field Laboratory
Test Method: AASHTO T30-25: Standard Method of Test for Mechanical Analysis of Extracted Aggregate (Mechanical Analysis)
Test Release Date: 2026-05-18
Test Results
Individual or cumulative mass retained on each sieve?: Cumulative Mass Retained
Has the fine aggregate sample been reduced?: No
Is an aggregate correction factor used?: Yes
Was the aggregate obtained using ASTM D8159?: No
Input Type: Calculated
Tester's full name: Neale Brown
Date of test: 05/18/2026
Cumulative percent passing the 2 in. sieve: 100 %
Cumulative percent passing the 1 1/2 in. sieve: 100 %
Cumulative percent passing the 1 in. sieve: 100 %
Cumulative percent passing the 3/4 in. sieve: 100 %
Cumulative percent passing the 1/2 in. sieve: 87 %
Cumulative percent passing the 3/8 in. sieve: 71 %
Cumulative percent passing the #4 sieve: 47 %
Cumulative percent passing the #8 sieve: 30 %
Cumulative percent passing the #16 sieve: 21 %
Cumulative percent passing the #30 sieve: 15 %
Cumulative percent passing the #50 sieve: 10 %
Cumulative percent passing the #100 sieve: 6 %
Cumulative percent passing the #200 sieve: 4.1 %
General comments (publicly viewable) (Max 1000 characters):
Test File Attachments
| File Name | Extension | File Size | Date Uploaded | Test ID | Actions |
|---|---|---|---|---|---|
| 06-0U2904_37043_260517_L1SL19_T30 | 280.63 KB | 05/18/2026 | 2026-05-17-4-1 | Info |
Test was verified on 5/18/2026 ✔