Summary for Test 2026-05-04-43-5
Test performed: AASHTO T30-19Project Information
| Project Identifiers | Project ID: 993454 DEA: 040K8004 EFIS: 0416000141 COOP: 042892 |
|---|---|
| DIST-CO-RTE-PM | 04-MRN-101-13.7 |
| Award Date | 02/05/2025 |
| Closeout Date | Not set |
| Work Description | CONSTRUCT ROUNDABOUT, CURB RAMPS AND SW, SIGNAL AND LIGHTING SYSTEMS. |
| Location Description | MARIN COUNTY IN SAN RAFAEL AT FREITAS PARKWAY OVERCROSSING |
| QA Service Level | 1 (Verified on 12/10/2021) |
Sample Information
| Sample Taken Date | 05/04/2026 | Sample Unique Key | 43 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 05/04/2026 |
| Sample type | Quality Assurance | A brief description of the sample | 3/4 HMA |
| The quantity of what the sample constitutes | 4 Boxes 1 Bag | From where was the sample collected | Job Site |
| First name of sampler or witnessed by | Jose Leon | Last name of sampler or witnessed by | Amparan |
| Title of sampler | Telephone number of sampler | ||
| Laboratory sample identification | Linked DIME Sample ID | ||
| The fabricator/manufacturer/facility name | Dutra San Rafael | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name | Bid Item | Not set |
Material Information
| Material Type | Hot Mix Asphalt | HMA Type | Type A HMA |
|---|---|---|---|
| HMA Grading | 3/4 inch | Lot number | |
| Sublot number | HMA Mix Number | ||
| Binder content (%) | 0.0 | Virgin binder PG | |
| Design binder PG | Binder Supplier | ||
| RAP content (%) | Not set | WMA Additives | |
| Antistrip type |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2026-05-04-43
DIME Test ID: 2026-05-04-43-5
Testing Lab: CT D04 - Richmond Field Laboratory
Test Method: AASHTO T30-19: Standard Method of Test for Mechanical Analysis of Extracted Aggregate (Mechanical Analysis)
Test Release Date: 2026-05-13
Test Results
Does this test use 1/4 sieve?: Yes
Is an aggregate correction factor used?: Yes
Input Type: Measured
Tester's full name: IGNACIO ARECHIGA
Date of test: 05/04/2026
| Cumulative Mass Retained | Correction Factor | Cumulative Percent Passing | ||||
|---|---|---|---|---|---|---|
| 1884.6 grams | ||||||
| 0.0 grams | 0.0 % | 100 % | ||||
| 0.0 grams | 0.0 % | 100 % | ||||
| 0.0 grams | 0.0 % | 100 % | ||||
| 0.0 grams | 0.2 % | 100 % | ||||
| 254.7 grams | -2.6 % | 84 % | ||||
| 487.0 grams | -7.2 % | 67 % | ||||
| 1137.1 grams | -6.1 % | 34 % | ||||
| 1137.1 grams | -6.1 % | 34 % | ||||
| 1420.2 grams | -4.8 % | 20 % | ||||
| 1576.6 grams | -3.7 % | 13 % | ||||
| 1671.8 grams | -2.9 % | 8 % | ||||
| 1751.6 grams | -2.1 % | 5 % | ||||
| 1823.0 grams | -1.3 % | 2 % | ||||
| 1874.5 grams | -0.5 % | 0.0 % | ||||
| 1875.0 grams | ||||||
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 5/13/2026 ✔