Summary for Test 2024-11-05-91-1
Test performed: AASHTO T209-12Project Information
| Project Identifiers | Project ID: 66665 DEA: BMD EFIS: BMD |
|---|---|
| DIST-CO-RTE-PM | 59--- |
| Award Date | Not set |
| Closeout Date | Not set |
| Work Description | Special project for submitting Balanced Mix Design (BMD) data for hot mix asphalt. UCPRC is collecting BMD data from the test track built for accelerated pavement testing |
| Location Description | Not set |
| QA Service Level | NOT VERIFIED |
Sample Information
| Sample Taken Date | 11/05/2024 | Sample Unique Key | 91 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 11/08/2024 |
| Sample type | Informational | A brief description of the sample | BMD TT3- 0.75 SP +2.5% Rej. Surface 25% RAP 58-22 |
| The quantity of what the sample constitutes | 48 Boxes | From where was the sample collected | Source |
| First name of sampler or witnessed by | James | Last name of sampler or witnessed by | Brewster (WITNESS) |
| Title of sampler | MREA | Telephone number of sampler | 9169064487 |
| Laboratory sample identification | 025-002 | Linked DIME Sample ID | |
| The fabricator/manufacturer/facility name | George Reed Clements | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name | Bid Item | Not set |
Material Information
| Material Type | Hot Mix Asphalt | HMA Type | Type A HMA |
|---|---|---|---|
| HMA Grading | 3/4 inch | Lot number | 1 |
| Sublot number | 1 | HMA Mix Number | TT4 |
| Binder content (%) | 4.6 | Virgin binder PG | PG 64-16 |
| Design binder PG | PG 58-22 | Binder Supplier | Valero Benicia |
| RAP content (%) | 25 | WMA Additives | No |
| Antistrip type | N/A |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2024-11-05-91
DIME Test ID: 2024-11-05-91-1
Testing Lab: CT HQ - Sacramento Hot Mix Asphalt Laboratory
Test Method: AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)
Test Release Date: 2026-06-16
Test Results
Number of tests: 2
What is the unit of measurement for theoretical density?: US Units
Mass Determination: Water
Input Type: Measured
Tester's full name: James Brewster
Date of test: 10/22/2025
Method Performed: Mechanical Agitation - Method A
Mass of oven-dry sample in air for Sample 1: 2642.7 grams
Mass of sample in water for Sample 1: 1627.3 grams
Mass of oven-dry sample in air for Sample 2: 2640.2 grams
Mass of sample in water for Sample 2: 1628.1 grams
Temperature of Water: 77 °F
Specific Gravity for Sample 1: 2.603
Specific Gravity for Sample 2: 2.609
Average Specific Gravity: 2.606
Theoretical maximum density at 25°C (77°F): 162.2 lb/ft^3
General comments (publicly viewable) (Max 1000 characters): Unaged Material
Test was verified on 6/16/2026 ✔