Summary for Test 2018-03-13-9-2
Test performed: ASTM D624-00-re12Project Information
| Project Identifiers | Project ID: 212748 DEA: 081F2704 EFIS: 0814000195 |
|---|---|
| DIST-CO-RTE-PM | 08-SBD-210-R29.3/R33.0 |
| Award Date | 12/04/2017 |
| Closeout Date | 06/23/2021 |
| Work Description | TREAT DECK, REPLACE JOINT SEALS AND ELASTOMERIC BEARING PADS |
| Location Description | SAN BERNARDINO COUNTY IN REDLANDS AND HIGHLAND AT VARIOUS LOCATIONS FROM BASELINE ROAD TO ROUTE 210/10 SEPARATION |
| QA Service Level | 1 (Verified on 01/05/2018) |
Sample Information
| Sample Taken Date | 03/13/2018 | Sample Unique Key | 9 |
|---|---|---|---|
| Date that the sample was received by the laboratory/organization performing the testing | 03/15/2018 | Sample type | Quality Assurance |
| A brief description of the sample | Bearing Pad | The quantity of what the sample constitutes | 1 |
| From where was the sample collected | Manufacturer | First name of sampler or witnessed by | Pete |
| Last name of sampler or witnessed by | Etcheverry | Title of sampler | Quality Manager |
| Telephone number of sampler | Unknown | Laboratory sample identification | Unknown |
| Linked DIME Sample ID | Unknown | The fabricator/manufacturer/facility name | Scougal Rubber |
| Transportation Laboratory (TL) Number | Unknown | Inspector Lot Number from the Transportation Laboratory (TL) Form | Unknown |
| Structure unique identifier | Not set | Structure name | Not set |
| Bid Item | Not set |
Material Information
| Material Type | SMTL TM1 - Elastomeric Bearing Pad | Mfg. Lot Number(s) | 16487-1 |
|---|---|---|---|
| Material/Compound/Elastomer ID | Unknown | Samples Representing | 7 |
| Description (size) | 3.5"x20"x22" | Comments | Unknown |
| Description (Number of Shims) | 7 | Type of Bearing Pad | Steel |
| Description (Thickness of Shims) | 14 gage | Manufacturer(s) | Scougal Rubber |
| Batch Number | Unknown |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2018-03-13-9
DIME Test ID: 2018-03-13-9-2
Testing Lab: CT HQ - Sacramento Structural Materials Testing Laboratory
Test Method: ASTM D624-00-re12: Standard Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers
Test Release Date: 2018-04-02
Test Results
Number of specimens tested: 3
Input Type: Measured
Tester's full name: Randy
Date of test: 03/19/2018
Humidity: 50 %
Temperature: 70 F
Sample 1 Median Thickness: 0.074 in
Sample 1 Tear Strength: 216.2 lbf / in
Sample 2 Median Thickness: 0.069 in
Sample 2 Tear Strength: 231.9 lbf / in
Sample 3 Median Thickness: 0.069 in
Sample 3 Tear Strength: 202.9 lbf / in
UTM: no data
Median of the Tear Strength Values: 216.2 lb/in
General comments (publicly viewable) (Max 1000 characters):
Test Graph
Source: Partner Data Point FileTest graph for Sample 1
Source: Partner Data Point File
Test graph for Sample 2
Source: Partner Data Point File
Test graph for Sample 3
Test was verified on 3/26/2018 ✔